Fraudulent
发表于 2025-3-26 22:11:10
http://reply.papertrans.cn/59/5815/581468/581468_31.png
带来
发表于 2025-3-27 03:04:00
Dongdong Gumith 2009), or even MTV television (Think MTV 2009), sends the message that the world is deeply concerned with social and ecological issues. Topics range from CO. emissions, water rights, and de-forestation, to child labour, peace, and social equity. The needs of society and the environment present
CLIFF
发表于 2025-3-27 08:52:07
http://reply.papertrans.cn/59/5815/581468/581468_33.png
难管
发表于 2025-3-27 11:28:04
Laser Additive Manufacturing (AM): Classification, Processing Philosophy, and Metallurgical Mechaniufacturing (AM) processes. Laser-based AM processes generally have a complex nonequilibrium physical and chemical metallurgical nature, which is material- and process-dependant. The influence of material characteristics and processing conditions on the metallurgical mechanisms and resultant microstr
幼稚
发表于 2025-3-27 15:02:25
http://reply.papertrans.cn/59/5815/581468/581468_35.png
没血色
发表于 2025-3-27 20:04:53
,, Ti–Si Intermetallic-Based Composites by Selective Laser Melting (SLM) Additive Manufacturing (AM) TiN/Ti.Si. composite parts were produced by selective laser melting (SLM) additive manufacturing (AM) process, starting from the high-energy ball-milled SiC/Ti and Si.N./Ti powder systems. The influence of the applied laser energy density on the densification behavior, microstructural features, mic
尖
发表于 2025-3-27 22:54:32
http://reply.papertrans.cn/59/5815/581468/581468_37.png
MELD
发表于 2025-3-28 02:09:29
Nanoscale TiC Particle-Reinforced AlSi10Mg Bulk-Form Nanocomposites by Selective Laser Melting (SLMially the “linear laser energy density” (LED), on densification behavior, microstructural evolution, and mechanical properties of SLM-processed nanocomposites were studied. Using an insufficient LED lowered the SLM densification due to the balling effect and the formation of residual pores. The nano
震惊
发表于 2025-3-28 07:04:07
Novel Aluminum Based Composites by Selective Laser Melting (SLM) Additive Manufacturing (AM): Tailoe influence of the SLM processing parameters on the constitutional phases, microstructural features, and mechanical performance of the SLM-processed Al-based composites was studied. The reinforcing phases in the SLM-processed Al-based composites included the unmelted micron-sized SiC particles, the
bifurcate
发表于 2025-3-28 13:08:22
Particle-Reinforced Cu Matrix Composites by Direct Metal Laser Sintering (DMLS) Additive Manufacturosite parts were performed. By means of the addition of WC reinforcing particles in the form of WC–Co composite powder, the design strategy and formation mechanism of the graded interface during DMLS were investigated to improve the interfacial bonding and material integrity between the WC reinforce