Stagger
发表于 2025-3-23 10:12:18
http://reply.papertrans.cn/59/5815/581468/581468_11.png
轻浮思想
发表于 2025-3-23 14:22:28
http://reply.papertrans.cn/59/5815/581468/581468_12.png
高兴去去
发表于 2025-3-23 19:31:31
http://reply.papertrans.cn/59/5815/581468/581468_13.png
财产
发表于 2025-3-23 23:04:56
Laser Additive Manufacturing (AM): Classification, Processing Philosophy, and Metallurgical Mechaniview of material and process aspects of AM, including the physical aspects of materials for AM and the microstructural and mechanical properties of AM-processed components, is presented. The purpose of this chapter is to establish a general relationship among material, process, and metallurgical mec
stroke
发表于 2025-3-24 05:48:07
http://reply.papertrans.cn/59/5815/581468/581468_15.png
Inordinate
发表于 2025-3-24 07:44:11
Nanoscale TiC Particle-Reinforced AlSi10Mg Bulk-Form Nanocomposites by Selective Laser Melting (SLMM-processed AlSi10Mg part while maintaining the sufficient ductility. Both the insufficient SLM densification response at a relatively low LED and the disappearance of nanoscale reinforcement at a high LED lowered the hardness and wear performance of SLM-processed TiC/AlSi10Mg nanocomposite parts.
铁塔等
发表于 2025-3-24 12:20:23
Novel Aluminum Based Composites by Selective Laser Melting (SLM) Additive Manufacturing (AM): Tailoical density) was achieved for LED larger than 1000 J/m. Due to the generation of the multiple reinforcing phases, elevated mechanical properties were obtained for the SLM-processed Al-based composites, showing a high microhardness of 214 HV., a considerably low coefficient of friction (COF) of 0.39
原谅
发表于 2025-3-24 17:33:03
Particle-Reinforced Cu Matrix Composites by Direct Metal Laser Sintering (DMLS) Additive Manufacturosite parts were studied comprehensively, in order to propose the effective process control and material optimization methods to improve microstructural and mechanical performance of DMLS-processed metal matrix composites (MMCs). A detailed investigation of the influence of rare earth (RE) La.O. add
obscurity
发表于 2025-3-24 21:52:28
http://reply.papertrans.cn/59/5815/581468/581468_19.png
ANN
发表于 2025-3-24 23:48:31
Book 2015ng. This is a book for researchers, students, practicing engineers and manufacturing industry professionals interested in laser additive manufacturing and laser materials processing. Dongdong Gu is a Professor at College of Materials Science and Technology, Nanjing University of Aeronautics and Astr