保守
发表于 2025-3-28 17:17:24
http://reply.papertrans.cn/48/4719/471824/471824_41.png
唤起
发表于 2025-3-28 19:45:29
Scanning Electron Microscopy Analysis of Titanium Coatings on Steel Substratese heated to 200 .C. The samples were subjected to high vacuum annealing during 30 mins at various temperatures between 400 and 1000 .C. The heat treatments results the interaction between the two parts of the system which was controlled by scanning electron microscopy analysis. The results show the
receptors
发表于 2025-3-29 02:12:30
A Novel Three-Dimensional Visual Inspection Scheme for Defect Detection of Transparent Materials Basay be difficult to discriminate between the high-grade and the low-grade mass components. Therefore, here we propose a novel three-dimensional (3-D) visual inspection scheme for effective detection of defects of the transparent materials based on a digital holographic microscopy, which is optically
察觉
发表于 2025-3-29 04:26:25
The Use of Scanning Electron Microscopy to Identify Zeolite Mineralsxygen tetrahedrons, which are arranged in three dimension, form the spatial lattice about frame structure. The primary method of zeolite identification is the X-ray Diffraction. An alternative method for recognizing zeolites is a scanning electron microscopy (SEM) combined with chemical analysis in
为宠爱
发表于 2025-3-29 08:14:15
http://reply.papertrans.cn/48/4719/471824/471824_45.png
Adenoma
发表于 2025-3-29 15:10:04
http://reply.papertrans.cn/48/4719/471824/471824_46.png
情爱
发表于 2025-3-29 16:35:35
http://reply.papertrans.cn/48/4719/471824/471824_47.png
废止
发表于 2025-3-29 23:27:20
The Numerical Calculation of the a Viscous Incompressible Fluid Transfer onto Porous Surface Betweenplitting down of ink film is carried out with the help of finite—difference methods. It is shown creation possibility of local ink liftoff areas from paper surface, when escaping the printing engagement zone. The numerical calculations for motion of free boundaries were investigated for various valu
gentle
发表于 2025-3-30 03:02:15
Microstructural Investigation of MIG-Brazed 304L Stainless Steel Jointse with 100 % Ar gas as a protective atmosphere. Specimens were prepared in butt and overlap joint positions. The metal inert gas (MIG) brazing operations were done with seven different arc voltages and weld currents as 40, 45, 50, 55, 60, 65 and 70 A. CuAl8 wire composed largely of copper serves as
事先无准备
发表于 2025-3-30 05:41:55
Microstructural Properties of Ceramics Produced from Granite and Zeolited feldspar. Zeolites are microporous, aluminosilicate minerals commonly used as commercial adsorbents. Zeolites are widely used in industry for water purification, as catalysts, for the preparation of advanced materials and in nuclear reprocessing. The aim of this study was to investigate the possib