acheon
发表于 2025-3-25 03:44:24
http://reply.papertrans.cn/48/4719/471824/471824_21.png
陈旧
发表于 2025-3-25 09:49:05
http://reply.papertrans.cn/48/4719/471824/471824_22.png
后退
发表于 2025-3-25 15:29:02
Fractal Analysis of the Pore Space in Sandstones as Derived from Mercury Porosimetry and Image Analyerably lesser than the pore-throat diameters (10–50 .m) corresponding to threshold pressures. This means that only the pore throats connecting wider parts of the pore network (pores) exhibit the fractal structure. The assumption that the fractal dimension monitoring the distribution of the pore-spac
arousal
发表于 2025-3-25 15:55:48
Single Asperity Scratch Behaviour of Cast Stellite 6 Alloynderstand the nanotribological properties of Stellite alloys in published literature. In the current investigation results are discussed in terms of microstructural and tribo-mechanical evaluations to provide an understanding of the structure-property relationships. Results indicate that the wear be
虚弱的神经
发表于 2025-3-25 20:43:23
http://reply.papertrans.cn/48/4719/471824/471824_25.png
habile
发表于 2025-3-26 03:28:42
Characterization of CaO-ZrO, and CaO-ZrO,-Al,O,imilar phases to CaO-ZrO. has, differently include CaAl.O. phase. SEM-EDS analyses showed that the sintered samples have inhomogeneous grain structure and calcia was only dissolved in large zirconia grains. This means that calcia promoted grain growth of zirconia particles.
听写
发表于 2025-3-26 06:17:27
Study of Microstructure of the Al-Fe Alloys After Hot Rolling Deformationled numerous FeAl28 alloy phase separations of secondary nucleating sites favoured energetically, which are the boundary of grains/subgrains and dislocations. These changes in the structure of the test results have been confirmed by EBSD, which revealed the presence of grains/subgrains misorientatio
借喻
发表于 2025-3-26 10:36:13
Microstructure Characterization of High Mn-Al Steel After Hot Compression Teststh various deformation parameters like temperature and strain rate. Applied methods revealed the influence of deformation parameters on grain size, fraction of twinned grains and misorientation angles. The obtained results can be used for the development of this steels and their plastic deformation
Liability
发表于 2025-3-26 15:32:00
http://reply.papertrans.cn/48/4719/471824/471824_29.png
BIPED
发表于 2025-3-26 17:35:27
Kwang-Beom Seo,Byung-Mok Kim,Jung-Sik Koo,Eun-Soo Kimxes Gefüge unterschiedlichster Ebenen eingebunden. Dabei besteht leicht die Gefahr, die fachliche Perspektive des jeweiligen Anbieters aus dem Blick zu verlieren. Im Mittelpunkt einer solchen Betrachtung sollte schließlich der beteiligte Mensch stehen, der mit seinen Anliegen, Fragen und Problemen i