monologue
发表于 2025-4-1 02:33:13
http://reply.papertrans.cn/47/4672/467147/467147_61.png
gout109
发表于 2025-4-1 06:51:18
http://reply.papertrans.cn/47/4672/467147/467147_62.png
arousal
发表于 2025-4-1 13:11:21
Reliability Estimation of the Solid Lubricated Bearing Based on a General Wiener Process and Its ExC method is used to estimate all the unknown parameters in the proposed degradation model. Degradation data from experiment is used to validate the model. Results show that general Wiener process degradation model is fit well for the degradation data.
troponins
发表于 2025-4-1 18:05:31
http://reply.papertrans.cn/47/4672/467147/467147_64.png
incite
发表于 2025-4-1 21:27:07
http://reply.papertrans.cn/47/4672/467147/467147_65.png
树木中
发表于 2025-4-2 00:49:02
Research of Quasi-static Tests and Static Loading on Hybrid Adhesive Bonds,strength but proved an increase in the fatigue strength of adhesive bonds. Research results proved that the service life of adhesive bond decreased at loading 70% of adhesive bond static tensile strength, i.e. 100 to 400 cycles according to filler concentration.
令人心醉
发表于 2025-4-2 02:57:39
Simulation of Crashworthiness Performance of Thin-Walled Structures with Adapted Trigger Design,ex section design suitable for extrusion manufacturing process allowed for significant improvements in specific absorbed energy. The ability to tailor peak loads was validated for the original octagonal geometry allowing for a peak load reduction of approximately 20%.
凹槽
发表于 2025-4-2 07:07:31
http://reply.papertrans.cn/47/4672/467147/467147_68.png