向外
发表于 2025-3-28 15:06:10
http://reply.papertrans.cn/43/4266/426540/426540_41.png
BRIBE
发表于 2025-3-28 22:35:56
http://reply.papertrans.cn/43/4266/426540/426540_42.png
分贝
发表于 2025-3-29 02:33:49
http://reply.papertrans.cn/43/4266/426540/426540_43.png
sultry
发表于 2025-3-29 05:42:36
Dynamic Deformation of Materials and Structures Under Explosive Loadingshich are capable of treating nonlinear materials with a variety of dissipative mechanisms, such as thermal energy dependence, and hysteretic behavior in load-unload cycles in both shear and dilatation. Incremental plasticity theory is widely used for this purpose and a significant factor in this cho
无脊椎
发表于 2025-3-29 08:18:42
Deformation Maps in the Region of High Dislocation Velocityicular concern is the transition at high strain rates from a thermally activated to a linear viscous mode of deformation. New experimental data on aluminum and copper over a wide range in temperature and strain rates to 10. s. are presented. No evidence of the linear viscous mode was observed in the
赞美者
发表于 2025-3-29 14:51:02
http://reply.papertrans.cn/43/4266/426540/426540_46.png
吞没
发表于 2025-3-29 18:13:56
Experimental Studies on the Behaviour of Dislocations in Copper at High Rates of Strain time resolved measurements of the ultrasonic attenuation and velocity in specimens undergoing dynamic deformation. The highest strain rate imposed was about 80 /sec. From the ultrasonic data the density of the mobile dislocations was estimated as a function of the strain rate. The second work is me
Esophagitis
发表于 2025-3-29 22:17:19
Dislocation Concepts in the Mechanics of Rapid Deformation of Metalse of formation of dislocations in which all possible mechanisms for the production and annigilation of dislocations have been taken into account. The possibility for a common description of static and dynamic experiments on the basis of certain mechanism of propagation and multiplication of dislocat
原谅
发表于 2025-3-30 01:02:52
http://reply.papertrans.cn/43/4266/426540/426540_49.png
audiologist
发表于 2025-3-30 05:57:24
Dynamic Strength of Ti-Alloys and Al-Alloysout within the strain rate range of 10–. ∿10./s and the temperature range of -195°∿50°C. The experimental results reveal the effects of the strain rate and the temperature on the flow stress at 5% strain. The strain rate sensitivity obtained by the continuous tests or the incremental tests is also r