–吃
发表于 2025-3-30 09:18:21
A tolerance system to interface design and manufacturingview” and a “manufacturing view” onto the tolerances. The “functional view” supports the designer finding appropriate solutions concerning dimensions and tolerances for certain functions like “bearing seat” or “transfer torque”. The “manufacturing view” contains information about the feasibility, pr
Left-Atrium
发表于 2025-3-30 14:22:44
Contribution of a mathematical model of specifications of a part to their coherence analysisrfaces and we assemble this part on another which represents both the specified datum frame and the location of the tolerance zone. This model permits to know if some part features are over constrained or if the specification is not sufficient to define the location of the tolerance zone.
Vaginismus
发表于 2025-3-30 19:52:03
Parametric tolerancingto the fore the potentials of degrees of freedom present in mechanical assemblies..The functional analysis lays down the functional conditions of global effect which are performed by the external tolerancing, the clearances interfaces and the internal tolerancing. The product analysis enable us to p
Kindle
发表于 2025-3-30 21:11:56
http://reply.papertrans.cn/39/3862/386161/386161_54.png
仇恨
发表于 2025-3-31 02:53:31
On the education of the real geometry of mechanical parts through the tolerancing and the tridimensitly read and understand standardised specifications, and must show how tolerancing allows to control the real geometry of the part surfaces in order to respect functional requirements. This approach is illustrated through a real case.
哺乳动物
发表于 2025-3-31 07:19:42
E. M. Tan,J.-Y. Zhang,E. K. L. Chano propose a solution principle to solve this problem..Firstly, we will analyse and propose a solution to the question of the overall consistency of the dimensioning diagram of a mechanical part..In particular, we will show the importance of a specification which is too often implicit - that of the d
Soliloquy
发表于 2025-3-31 11:59:11
Sjögren’s Syndrome, IgG4-Related Disordersion techniques and apply genetic algorithms. This paper proposes an alternative, gradient-based optimisation technique which applies a simplified algorithm. Through the implementation of an illustrated example, it is shown that the efficiency is remarkably high. This approach is also effective for t
烦躁的女人
发表于 2025-3-31 15:03:21
D. J. R. Laurence,A. M. Nevilleuct functional geometry is required. In this paper, we propose a model making it possible to build a virtual gauge with internal mobilities, and to specify a part, a mechanism or a manufacturing process..The approach by gauge with internal mobilities establishes the domain of functionally acceptable