oblique
发表于 2025-3-26 21:25:25
2190-5053 achieve longer emission wavelengths and short-pulse emission. Experimental and theoretical approaches are employed to address the individual device properties and optimize the laser diodes toward the requirements of specific applications.978-3-642-43548-5978-3-642-24538-1Series ISSN 2190-5053 Series E-ISSN 2190-5061
辩论
发表于 2025-3-27 02:51:48
http://reply.papertrans.cn/39/3803/380203/380203_32.png
Alpha-Cells
发表于 2025-3-27 06:35:20
Thermal Properties, devices due to ohmic losses and non-radiative recombination is a limiting factor, as an increase in device temperature results in a reduction of output power, a redshift of the emission wavelength, and thermal lensing. Therefore it is crucial to investigate the mechanisms of self-heating in laser d
ELATE
发表于 2025-3-27 11:03:11
http://reply.papertrans.cn/39/3803/380203/380203_34.png
LIMIT
发表于 2025-3-27 16:54:25
http://reply.papertrans.cn/39/3803/380203/380203_35.png
Coordinate
发表于 2025-3-27 20:39:51
http://reply.papertrans.cn/39/3803/380203/380203_36.png
AUGER
发表于 2025-3-28 01:41:08
Short-Pulse Laser Diodes, the improvement of maximum output power and efficiency. The principal device concept is the Fabry-Perot-type single-section ridge laser diode. Other device concepts, which have been extensively studied in the group-III-arsenide and -phosphide material systems, are scarcely implemented in the nitrid
LIMIT
发表于 2025-3-28 04:34:13
Summary and Conclusions,n wavelength and realize true-green laser diodes for projection and display applications. Furthermore, it covers the realization of multi-section laser diodes on GaN, a device concept for the generation of short pulses, which is successfully adapted from infrared laser diodes. Spectral and temporal
牢骚
发表于 2025-3-28 09:49:33
http://reply.papertrans.cn/39/3803/380203/380203_39.png
Abjure
发表于 2025-3-28 12:18:08
Was heißt Streß?ich Monotonie und Gleichförmigkeit bestimmter Arbeitsroutinen noch hinzu, dann heißt dies, daß die Hälfte aller arbeitsbezogenen Belastungen eine Form von Streß darstellt. Erst danach kommen rein physische Aspekte wie Lärm, Hitze, Staub, Geruch und sonstige Belästigungen hinzu (vgl. Tabelle 1).