accomplishment
发表于 2025-3-28 15:50:19
Bone-Based Biomechanical Numerical Analysis and Its Weight Loss Due to the Presence of Osteoporosise evaluation of these structures, the severity of the condition, or its consequences and the establishment of possible treatments. This paper presents the implementation of a complex model of the bone structure of the human hip that is developed using computational tomography to determine structural
overbearing
发表于 2025-3-28 22:44:24
Analysis Developed from an Extremely Complex System of the Human Shoulder Based on Finite Element Momputational package. The shoulder joint is highly complex because the range of motion is greater than the ranges of motion of other joints in the human body. In addition, it is unstable since the shoulder is attached to the upper trunk of the body by static stabilizers (ligaments) and dynamic stabi
IDEAS
发表于 2025-3-28 23:21:38
,Biomechanical Analysis of the Human Body Thorax Protected by a Kevlar® Plate When Subjected to a Poaken in this project involved the creation of a biomodel from computed tomography (CT) scans. This biomodel was then used for numerical analysis using the finite element method (FEM). Through this approach, it is possible to observe how the thorax of an adult male behaves when subjected to a force t
世俗
发表于 2025-3-29 06:49:12
http://reply.papertrans.cn/33/3207/320624/320624_44.png
Dysplasia
发表于 2025-3-29 09:49:09
http://reply.papertrans.cn/33/3207/320624/320624_45.png
phase-2-enzyme
发表于 2025-3-29 12:16:32
https://doi.org/10.1007/978-981-97-1294-6 The good agreement between the results obtained experimentally using optical and standard strain gauge measurement methods was found. Basic material parameter (Young´s elasticity modulus) was calculated consequently from obtained strain fields. The presented non-contact optical deformation measurem
MEEK
发表于 2025-3-29 18:19:54
https://doi.org/10.1007/978-3-540-49717-2nternal and external diameter dimensions. The ASME code was followed in the estimation of the internal wall thinning. For the soil-side corrosion, it was applied a statistical model, which predicts the corrosion rate.
任意
发表于 2025-3-29 23:24:31
https://doi.org/10.1007/978-3-030-94091-1is adopted as the global stage, whereas the Nelder-Mead scheme is used for the local stage. The strategy was successfully applied for the proposed problem, in which the total sample mass and geometrical distortion were used to determine moisture diffusive parameters and swelling/shrinkage coefficien
半导体
发表于 2025-3-30 00:34:03
Solid Mechanics and Its Applications The research results can be used to simulate tire casings of passenger cars since the tire casing consists of elastomer parts, parts with polymer cords as well as steel cords in the tire crown and carcass as the reinforcement.
PRO
发表于 2025-3-30 04:28:23
General theory of eigenstrains,ents of adequately modified lengths (and without any change in the number of degrees of freedom), beneficial effects on the quality of the results are achieved (with an almost negligible increase in overall computational effort due to the additional implementation of the meshing algorithm). To demon