尊敬
发表于 2025-3-26 23:14:27
A Note on Optimization-Based Strategies to Identification of Material Parameters in Thermo-Hygro-Meis adopted as the global stage, whereas the Nelder-Mead scheme is used for the local stage. The strategy was successfully applied for the proposed problem, in which the total sample mass and geometrical distortion were used to determine moisture diffusive parameters and swelling/shrinkage coefficien
痛苦一生
发表于 2025-3-27 02:55:42
Computational Simulation of Biaxial Loading of Polymer Composites in ANSYS, The research results can be used to simulate tire casings of passenger cars since the tire casing consists of elastomer parts, parts with polymer cords as well as steel cords in the tire crown and carcass as the reinforcement.
人类
发表于 2025-3-27 06:21:47
Simple Discretisation Strategies for Better Convergence of Finite Element Model Without Increasing ents of adequately modified lengths (and without any change in the number of degrees of freedom), beneficial effects on the quality of the results are achieved (with an almost negligible increase in overall computational effort due to the additional implementation of the meshing algorithm). To demon
BRIBE
发表于 2025-3-27 12:54:36
Pinhole Effect and Formation of Microplastics on PVC, PP and PET Surfaces Initiated by Plasma,hole. It has been observed that in the vicinity of these holes and even in remote areas of the surfaces of these thermoplastics, the formation of particles can occur, which can be simplified classified as microplastics upon initial examination. Therefore, the study also provides quantification of th
CHURL
发表于 2025-3-27 16:12:24
http://reply.papertrans.cn/33/3207/320624/320624_35.png
药物
发表于 2025-3-27 20:19:32
http://reply.papertrans.cn/33/3207/320624/320624_36.png
jungle
发表于 2025-3-27 23:37:39
Experimental Dynamic Testing for Wear of TMJ Prosthesis Component in a Multiaxial Join Simulator,ts in the inferior and superior cavities, respectively. These movements result from the position of the articular disc situated between the glenoid fossa and the mandibular condyle. Temporomandibular disorders (TMD) can arise from various factors, including malocclusion, teeth grinding, jaw injuries
Lobotomy
发表于 2025-3-28 03:56:20
Numerical Analysis of the Coxofemoral Joint with Hip Prosthesis and Aggressive Osteoporosis,e a complete or partial hip replacement to restore patient mobility. This research analyzed the biomechanics of different hip prostheses used in a patient with hip fractures caused by osteoporosis. A bio- model and the finite element method were employed to simulate the external agent conditions on
languor
发表于 2025-3-28 09:37:41
Numerical Mechanical Design of a Football Helmet to Dissipate Energy Through Finite Element Failureh Ridell company opened to the commercial market in 2018), and it is widely used worldwide. Initially, a CAD program is applied to develop the numerical model of a commercial helmet focusing on the possible implementation of geometry changes to reduce the high risk of concussion index. Nevertheless,
FLIC
发表于 2025-3-28 11:38:03
Bone Biomodel for Mechanical Simulation Using Finite Elements, the conditions above (linearity, isotropy, continuity, and homogeneity). Lately, these conditions have surpassed themselves by numeric development analysis. However, biological system homogeneity implies great difficulty and significant computational resources. This contribution shows a methodology