FID
发表于 2025-3-30 09:48:27
http://reply.papertrans.cn/32/3190/318955/318955_51.png
传授知识
发表于 2025-3-30 13:17:10
http://reply.papertrans.cn/32/3190/318955/318955_52.png
Hypopnea
发表于 2025-3-30 16:47:27
Besonderheiten der Arbeitsbeziehungen,ct between multiple paths satisfying the .. = 0 condition. This path selection is a simple but difficult benchmark case for both analytical and numerical methods of predicting crack propagation. We document the development of the specimen, using an uncracked and instrumented test case to study the e
先兆
发表于 2025-3-30 22:27:46
http://reply.papertrans.cn/32/3190/318955/318955_54.png
向外供接触
发表于 2025-3-31 03:21:44
,Gewerkschaften und öffentlicher Dienst, seldom conducted to validate the model for experimental conditions outside those used in the fitting procedure. To increase the accuracy and validity of these advanced constitutive models, software and testing methodology have been developed to seamlessly integrate experimentation, parameter identi
共和国
发表于 2025-3-31 06:28:53
Aspekte unserer Organisationskulturo allow direct measurements. This paper focuses on the development of a method that combines the hole-drilling technique with Digital Image Correlation (DIC) to evaluate these difficult-to-measure structural stresses. The hole-drilling technique works by relating local displacements caused by the re
prodrome
发表于 2025-3-31 12:46:33
Detlef Gerst,Klaus Pickshaus,Hilde Wagnerds Method (VFM), is getting an increasing interest in the recent years. That allows identifying material properties by performing tests on specimens with heterogeneous stress-strain fields. Respects to standard techniques, VFM consents to reduce the number of tests required to identify complex const
运动的我
发表于 2025-3-31 16:17:08
http://reply.papertrans.cn/32/3190/318955/318955_58.png
Self-Help-Group
发表于 2025-3-31 19:36:13
https://doi.org/10.1007/978-3-322-88181-6orientations (0°, 45° and 90°) with respect to the rolling direction. Digital image correlation (DIC) techniques were employed to measure the strains in the experiments. The AA7075-T6 alloy showed mild rate sensitivity over the range of strain rates tested. The level of plastic anisotropy was charac
Sputum
发表于 2025-3-31 23:33:39
http://reply.papertrans.cn/32/3190/318955/318955_60.png