联想
发表于 2025-3-26 21:51:46
Constitutive Response of AA7075-T6 Aluminum Alloy Sheet in Tensile and Shear Loading,ally determined by converting the shear stress to an equivalent uniaxial stress and fit using a Hockett–Sherby model. The calibrated anisotropic yield criterion was able to capture the material anisotropy providing good agreement with the experiment data.
Barrister
发表于 2025-3-27 05:04:01
http://reply.papertrans.cn/32/3190/318955/318955_32.png
字谜游戏
发表于 2025-3-27 08:39:10
Viscoelastic Relaxation of HEMA-DMAEMA Responsive Hydrogels,ied. The rise time for our experiments was 0.3 s and the step-strains ranged from 3 to 7 % strain. Relaxation was recorded over three decades of time (1, 10, 100 and 1000 s). It was found that within this range the HEMA-DMAEMA hydrogel displayed linear-viscoelastic behavior.
Halfhearted
发表于 2025-3-27 13:04:18
http://reply.papertrans.cn/32/3190/318955/318955_34.png
混沌
发表于 2025-3-27 14:43:47
Gewerkschaften im Umbau des Sozialstaatsve the mechanical property variation in the near-surface region. The measurements indicated significant softening and modulus reduction near the grain boundaries. Such findings could further elucidate the underlying deformation mechanisms during the early stage of SCC as a function of degradation level.
灌输
发表于 2025-3-27 18:27:53
http://reply.papertrans.cn/32/3190/318955/318955_36.png
CURL
发表于 2025-3-27 23:31:38
,Messen der einzelnen Meßgrößen,sure foam’s hysteresis properties, i.e. stiffness and energy dissipation. The cyclic characterization includes foams with different amount of pre-strains, some are beyond the initial linear range as occurred in many applications.
威胁你
发表于 2025-3-28 04:38:06
http://reply.papertrans.cn/32/3190/318955/318955_38.png
micturition
发表于 2025-3-28 07:33:45
http://reply.papertrans.cn/32/3190/318955/318955_39.png
Palpable
发表于 2025-3-28 11:35:54
Cyclic Loading Experiment for Characterizing Foam Viscoelastic Behavior,sure foam’s hysteresis properties, i.e. stiffness and energy dissipation. The cyclic characterization includes foams with different amount of pre-strains, some are beyond the initial linear range as occurred in many applications.