Noctambulant
发表于 2025-3-26 21:00:55
http://reply.papertrans.cn/32/3112/311102/311102_31.png
灾祸
发表于 2025-3-27 03:22:53
https://doi.org/10.1007/978-1-349-16399-1mperature than the metals being soldered. Two types of solder are commonly used One is a soft solder, which is an alloy of tin and lead. The other is a ., which is an alloy of copper and zinc and is often called spelt or silver solder.
避开
发表于 2025-3-27 07:12:50
http://reply.papertrans.cn/32/3112/311102/311102_33.png
floaters
发表于 2025-3-27 11:53:37
https://doi.org/10.1007/978-3-031-14216-1re removed from the body of a metal, is similar to the action of a chisel as shown in Fig 1.1. The pointed part of the tool is a wedge, which presses heavily on the body of the metal, and tears off a chip when the metal moves relative to the tool.
ostracize
发表于 2025-3-27 15:03:13
http://reply.papertrans.cn/32/3112/311102/311102_35.png
左右连贯
发表于 2025-3-27 19:38:28
https://doi.org/10.1007/978-3-031-16057-8 a table, and metal is removed from its surface by a single point metal cutting tool, which has a reciprocating motion. Metal is removed only during the .. and no metal is removed during the . To reduce the total machining time, it is necessary to reduce the time taken by the return stroke. This is ensured by a . Fig 18.1 shows a typical shaper.
DECRY
发表于 2025-3-28 00:46:17
http://reply.papertrans.cn/32/3112/311102/311102_37.png
cortisol
发表于 2025-3-28 04:11:37
Drills and drilling machines,e drilling of a hole of the . at the . can be difficult. A large number of tools and machines have been designed for the drilling of holes economically, accurately, and quickly, in all types of materials.
让步
发表于 2025-3-28 07:39:56
Single point cutting tools,re removed from the body of a metal, is similar to the action of a chisel as shown in Fig 1.1. The pointed part of the tool is a wedge, which presses heavily on the body of the metal, and tears off a chip when the metal moves relative to the tool.
Wordlist
发表于 2025-3-28 12:36:23
http://reply.papertrans.cn/32/3112/311102/311102_40.png