RAGE
发表于 2025-3-23 10:07:39
4 Principal Stresses and Strains Associated with Torsion 173 4. 5 Analytical and Experimental Solutions for Torsion of Members of Noncircular Cross Sections 179 4. 6 Shearing Stress-Strain Properties 188 *4. 7 Computer Applications 195 5 Stresses in Beams 198 5. 1 Introduction 198 5. 2 Review of Pro
雪上轻舟飞过
发表于 2025-3-23 15:23:33
http://reply.papertrans.cn/32/3109/310865/310865_12.png
使迷惑
发表于 2025-3-23 20:07:06
https://doi.org/10.1057/9781137376183damental concepts and equations of statics provide the necessary background for determination of these internal forces. The equations of equilibrium together with the free-body-diagram concept are used to determine internal forces in members subjected to applied force systems. Emphasis is placed upo
可能性
发表于 2025-3-23 22:59:37
http://reply.papertrans.cn/32/3109/310865/310865_14.png
Spongy-Bone
发表于 2025-3-24 05:42:14
http://reply.papertrans.cn/32/3109/310865/310865_15.png
oxidant
发表于 2025-3-24 10:34:07
https://doi.org/10.1007/978-3-030-35407-7systems. These members are called upon to resist bending action that is usually produced either by loads that are perpendicular to the member (transverse loads) or by pure bending moments. Regardless of the way the beam is loaded, the resulting action leads to two effects that are of major significa
octogenarian
发表于 2025-3-24 11:19:29
Money for Nothing: When It Pays to Be Free,to repair, may occur in buildings. Shafts acting in bending may become misaligned in their bearings due to large deflections, resulting in excessive wear and possible malfunction. High-rise structures, which contain beam components, may deflect enough to cause psychological stress among the occupant
规范要多
发表于 2025-3-24 16:14:09
https://doi.org/10.1007/978-94-007-1147-1e is the fact that in all of these problems, the force system (including applied as well as known and unknown reactive forces, torques, and moments) could be fully ascertained by satisfying the applicable equations of equilibrium. In most practical situations, however, members are subjected to force
解开
发表于 2025-3-24 21:37:38
ansverse forces, to torques, and to bending moments as well as to combinations of these effects. In all instances, methods were developed to compute the stresses and deformations resulting from a given set of loading conditions.
挑剔为人
发表于 2025-3-25 00:32:09
http://reply.papertrans.cn/32/3109/310865/310865_20.png