Ambiguous
发表于 2025-3-30 08:39:19
http://reply.papertrans.cn/31/3092/309143/309143_51.png
grieve
发表于 2025-3-30 12:30:48
http://reply.papertrans.cn/31/3092/309143/309143_52.png
弯腰
发表于 2025-3-30 20:14:08
http://reply.papertrans.cn/31/3092/309143/309143_53.png
无法取消
发表于 2025-3-30 23:06:28
Enabling Industry 4.0 through Advances in Manufacturing and MaterialsSelected Articles fr
micronized
发表于 2025-3-31 02:16:04
http://reply.papertrans.cn/31/3092/309143/309143_55.png
Compass
发表于 2025-3-31 08:54:28
Compressive Failure Behaviour of Kevlar Epoxy and Glass Epoxy Composite Laminates Due to the Effectnate modelling and failure analysis was performed using a finite element software (ANSYS). The model with stacking sequence is [θ./0./−θ.]s and various fibre orientation, θ from 0° to 90° were investigated. Failure was determined using Maximum Stress Theory. The results show substantial strength red
欢呼
发表于 2025-3-31 12:06:51
http://reply.papertrans.cn/31/3092/309143/309143_57.png
无所不知
发表于 2025-3-31 17:10:00
Investigation of Tool Wear Mechanisms in Face Milling of Inconel 718 with Different Cutting Fluids, were observed at low cutting speed. At high speed, progressive nose notching was the main cause of tool failure. At low cutting speed, dry cutting produced the longest tool life followed by oil-based and synthetic cutting fluids. At higher cutting speed, synthetic fluid had the longest tool life fo
Melodrama
发表于 2025-3-31 20:54:56
http://reply.papertrans.cn/31/3092/309143/309143_59.png
细微差别
发表于 2025-3-31 21:44:19
Performance of Assessment Model for Injection Moulding Parameters,kg. Based on the statistical ANOVA analysis results, the most significant parameter affecting the compressive strength of plastic pallet is melting temperature, which is indicated by the percentage contribution of P = 63.67%, followed by holding pressure with 21.79%. Charging speed is the least sign