过渡时期
发表于 2025-3-26 22:08:30
Amiril Sahab Abdul Sani,Muhammed Nafis Osman ZahidPresents selected articles from the Manufacturing and Materials track of the iM3F 2021 conference, Malaysia.Highlights recent findings in manufacturing and materials pertinent toward Industry 4.0.Is u
Acupressure
发表于 2025-3-27 03:21:50
http://reply.papertrans.cn/31/3092/309143/309143_32.png
arthroplasty
发表于 2025-3-27 07:21:51
Oleg V. Shishkin,Svitlana V. Shishkinamanufacturing industry for achieving low cutting force. This is due to nickel-based superalloys is difficult-to-machine materials, thus increase in spindle speed will lead to thermal softening that may reduce cutting force, while decrease in feed per tooth will decrease the amount to shear unwanted
CLAP
发表于 2025-3-27 12:26:43
http://reply.papertrans.cn/31/3092/309143/309143_34.png
表两个
发表于 2025-3-27 13:48:55
http://reply.papertrans.cn/31/3092/309143/309143_35.png
注意
发表于 2025-3-27 19:20:01
http://reply.papertrans.cn/31/3092/309143/309143_36.png
过份艳丽
发表于 2025-3-28 01:50:01
Jerzy Leszczynski,Manoj K. Shuklald be subjectively or objectively. Many studies emphasized the effectiveness of using objective techniques to derive criteria weights, like using entropy as a measure of fuzziness of the fuzzy sets to detect criteria weights. Despite that, still this subject under study and debate between researcher
GROWL
发表于 2025-3-28 04:43:40
https://doi.org/10.1007/978-3-642-05067-1udies the performance of assessment model for injection moulding parameters using Taguchi and ANOVA method. The objective of this research is to identify the best injection moulding parameters in producing plastic pallets in term of compressive strength when subjected to a constant load. Melting tem
Aprope
发表于 2025-3-28 08:58:20
http://reply.papertrans.cn/31/3092/309143/309143_39.png
烧瓶
发表于 2025-3-28 13:07:37
PIC Interfaced to I2C Compatible Devices,is one of AM technologies that rapidly growing due to its ability to fabricate complex geometric parts with lower cost. However, this technique requires further improvement and further investigation due to the shortcomings such as poor surface finish and low mechanical strength. This work is to dete