假装是你
发表于 2025-3-23 13:30:45
http://reply.papertrans.cn/29/2838/283740/283740_11.png
善辩
发表于 2025-3-23 14:05:41
Design, Manufacturing and Testing of an Out-of-Autoclave Liquid Resin Infused Carbon-Epoxy Curved StIRA). A SHM system is developed and installed to detect damages due to impacts. The panel is tested in compression with a test procedure compliant to aeronautical certification requirements for primary structures, to validate both the design and the manufacturing.
aerobic
发表于 2025-3-23 21:58:50
http://reply.papertrans.cn/29/2838/283740/283740_13.png
敌手
发表于 2025-3-23 23:48:28
Sustainability of Fused Deposition Modeling: The Role of the Plate Materiales for a better choice in the plate material of the 3D printer to reduce the energy consumption required by the process of heating the plate without renouncing to print parts that meet the industrial quality requirements.
无法破译
发表于 2025-3-24 04:58:57
http://reply.papertrans.cn/29/2838/283740/283740_15.png
前面
发表于 2025-3-24 08:10:54
http://reply.papertrans.cn/29/2838/283740/283740_16.png
Grating
发表于 2025-3-24 12:03:59
Dynamic Response and Failure of Composite Materials978-3-031-28547-9Series ISSN 2195-4356 Series E-ISSN 2195-4364
结束
发表于 2025-3-24 18:21:56
Vorschau,facturing procedures. The impact damage, obtained at U = 20J, was investigated by ultrasonic phased array techniques in order to propose an application field for such laminate. In addition, failure mechanisms were detected and evaluated to study the start and propagation of impact damage.
令人不快
发表于 2025-3-24 19:46:24
http://reply.papertrans.cn/29/2838/283740/283740_19.png
Cloudburst
发表于 2025-3-24 23:20:26
Wege durch den Forschungsdschungelnerated by low energy impacts, by using a network of sensors/actuators piezoceramics (PZT). This system is an offline system, pointing to be an alternative method to the current NDI/C-scan techniques..The activities were performed in SMAF (SMart AirFrame) project of PRORA (the Italian Aerospace Rese