使混合
发表于 2025-3-26 21:39:09
Book 2023 used for design rule determination, and the space colonization algorithm is adapted for the automated design. The validity of the procedure is proven experimentally, revealing sufficient mechanical performance alongside cost reduction at medium to large production scales..
灵敏
发表于 2025-3-27 04:07:23
Digital production by additive manufacturing,lied in additive manufacturing is described, as well as the digitalization of the manufacturing process by process simulation. The role of support structures, challenges in the application, as well as optimization approaches are discussed in detail. Last, approaches to the economic evaluation of laser powder bed fusion are presented.
licence
发表于 2025-3-27 08:25:05
http://reply.papertrans.cn/29/2804/280370/280370_33.png
enflame
发表于 2025-3-27 11:35:59
http://reply.papertrans.cn/29/2804/280370/280370_34.png
etidronate
发表于 2025-3-27 15:35:52
https://doi.org/10.1007/978-3-662-55922-2ired experience hinder the adoption of additive manufacturing. With regard to laser powder bed fusion of metals, the support structures are a key factor related to all these issues. Hence, this thesis deals with the digitalization of support structure design to contribute to an increase in additive manufacturing adoption.
boisterous
发表于 2025-3-27 20:27:59
Solid Waste Management and Recyclingd the design rules of chapter 5 are implemented. The complete tree support modeling procedure is described in detail and validated against the topology optimization results used to derive the design rules.
进入
发表于 2025-3-27 23:44:19
Introduction,efficiency to combat climate change and scarcity of resources, as well as the digital transformation. However, there are several barriers to the progression of additive manufacturing for end-use products. Aside from technical maturity, the high investment, associated cost, and time to build the requ
内向者
发表于 2025-3-28 02:19:48
http://reply.papertrans.cn/29/2804/280370/280370_38.png
空中
发表于 2025-3-28 07:32:40
Material Model of Ti-6Al-4V Alloy in Laser Powder Bed Fusion,is developed from literature as well as own experimental work. The modeled material properties include temperatures of phase transitions, density, specific heat capacity, thermal conductivity, absorption of laser radiation, Young’s modulus, yield strength, ultimate tensile strength, Poisson’s ratio,
Anthropoid
发表于 2025-3-28 11:26:54
Support Structure Topology Optimization,matic topology optimization. The design domain and the applied structural loads are varied and numerous either toplogy- or shape-related parameters are evaluated. Design rules are formulated such that integration in algorithmic design is possible.