forager
发表于 2025-3-28 16:58:21
Forschungsfragen und Zielsetzungure and time on the quality of the formed parts was studied. The most important result of the study is the demonstration that very short times over which the forming hydrostatic pressure is applied, of the order of few seconds,lead to less uneven thickness distribution and less fiber wash.
decode
发表于 2025-3-28 21:57:08
https://doi.org/10.1007/978-3-658-30774-5tamping time was 15 seconds, (b) fiber movement at the exterior bend range was much more intensive than that at the interior bend range, and (c) two modes of failure- transverse matrix cracking and interlaminar delamination-were observed.
PAN
发表于 2025-3-28 23:18:03
http://reply.papertrans.cn/28/2704/270302/270302_43.png
肌肉
发表于 2025-3-29 05:49:55
http://reply.papertrans.cn/28/2704/270302/270302_44.png
墙壁
发表于 2025-3-29 09:44:16
A Novel Tool to Determine the Optimum Fabrication Parameters of Thermoplastic CFRP Laminates plies should be kept open to vacuum as long as possible. Furthermore, from the shape of the not fully compacted area in the centre of the produced laminates it could be concluded, that the flow in a direction transverse to the fibre at the surface of the different plies controls the consolidation process.
娴熟
发表于 2025-3-29 14:25:31
Production, Properties and Applications of Metal Matrix Compositesure or, using preform technology, in selected regions of the casting. Some mechanical properties of squeeze cast MMCs are discussed, mainly from the standpoint of the conflicting requirements of strength and toughness.
全能
发表于 2025-3-29 18:14:27
http://reply.papertrans.cn/28/2704/270302/270302_47.png
终端
发表于 2025-3-29 20:46:27
http://reply.papertrans.cn/28/2704/270302/270302_48.png
prosperity
发表于 2025-3-30 01:14:38
http://reply.papertrans.cn/28/2704/270302/270302_49.png
Silent-Ischemia
发表于 2025-3-30 07:25:42
http://reply.papertrans.cn/28/2704/270302/270302_50.png