轿车
发表于 2025-3-23 12:17:15
http://reply.papertrans.cn/28/2704/270302/270302_11.png
表否定
发表于 2025-3-23 17:27:54
Forschungsfragen und ZielsetzungStructures made of more than one component must be joined together by suitable bonding techniques, enabling high loads without damage to the fibers. For joining thermoplastics both adhesion and welding are suitable techniques. In this paper the advantages and disadvantages of these different bonding techniques are discussed.
高尔夫
发表于 2025-3-23 20:32:13
Potential and Design Aspects of Ceramic Matrix CompositesThe characterizing properties of ceramic matrix composites differ from those of fiber reinforced polymers or monolithic ceramic materials. These properties are outlined in principal, as are the consequences for design aspects and applications, in order to show the potential of ceramic matrix composites.
栏杆
发表于 2025-3-24 00:48:28
http://reply.papertrans.cn/28/2704/270302/270302_14.png
Classify
发表于 2025-3-24 03:50:32
Adhesion and Welding of Continuous Carbon-Fiber Reinforced Polyether Etherketone (CF-PEEK/APC2)Structures made of more than one component must be joined together by suitable bonding techniques, enabling high loads without damage to the fibers. For joining thermoplastics both adhesion and welding are suitable techniques. In this paper the advantages and disadvantages of these different bonding techniques are discussed.
削减
发表于 2025-3-24 10:21:54
http://reply.papertrans.cn/28/2704/270302/270302_16.png
蚀刻
发表于 2025-3-24 13:29:55
http://reply.papertrans.cn/28/2704/270302/270302_17.png
蚀刻术
发表于 2025-3-24 17:32:57
Schule, Gewalt und Rechtsextremismusng quantitative aspeas. After the importance of intercorrelating the various methods of measuring interface parameters has been emphasised, the contribution of micromechanics to the prediction of the tensile strength of unidirectional silicon carbide/ metal com posites and the residual strength of n
雪崩
发表于 2025-3-24 22:53:58
https://doi.org/10.1007/978-3-322-80915-5ing molding. The comparison between two components of the same shape and size, the first one ribbed and the second one flat, is the starting point of a direct analysis of process’ conditions..A systematic approach based on design of experiments techniques is used for the optimization of molded part
无孔
发表于 2025-3-25 01:11:41
http://reply.papertrans.cn/28/2704/270302/270302_20.png