Magnitude 发表于 2025-3-27 00:32:55
http://reply.papertrans.cn/27/2686/268548/268548_31.pngMUMP 发表于 2025-3-27 01:55:54
http://reply.papertrans.cn/27/2686/268548/268548_32.pngBph773 发表于 2025-3-27 05:46:15
https://doi.org/10.1007/978-3-662-64836-0e search of optima. Expected improvement strategy is used to update the surrogate at every iteration, and optimization is terminated once the convergence criterion is met. The objective function improvement for maximizing . and maximizing (./.) is 18.08% and 38.70%, respectively.废墟 发表于 2025-3-27 09:48:10
http://reply.papertrans.cn/27/2686/268548/268548_34.pngOptic-Disk 发表于 2025-3-27 15:12:54
http://reply.papertrans.cn/27/2686/268548/268548_35.png座右铭 发表于 2025-3-27 17:55:07
Conference proceedings 2021y organized by Aeronautical Development Agency (the nodal agency for the design and development of combat aircraft in India), Gas-Turbine Research Establishment (responsible for design and development of gas turbine engines for military applications), and CSIR-National Aerospace Laboratories (invoevaculate 发表于 2025-3-28 00:05:42
Sensitivity of Altitude Variation on Aerodynamics of a Typical Launch Vehicle During Hot Separationtitude variation on the aerodynamics of the launch vehicle during hot separation. Two different trajectories (or altitudes) are studied and the effect on the aerodynamic coefficients is quantified. The paper presents in detail about the simulated conditions, the variation in aerodynamic coefficients and the complex flow-field involved.机械 发表于 2025-3-28 02:08:47
http://reply.papertrans.cn/27/2686/268548/268548_38.pngpulmonary 发表于 2025-3-28 10:02:26
Investigation of Wind Tunnel Blockage Effect on Liftoff Aerodynamics of a Launch Vehicle Through Op vehicle configuration in the presence of launch pad and umbilical tower (UT). It is seen that the aerodynamic characteristics are significantly influenced by the presence of wind tunnel walls. Even though the model blockage is 4%, variation of 8.5% is seen in total force coefficients.Anemia 发表于 2025-3-28 13:32:39
RANS Computations of Hypersonic Interference Heating on Flat Surface with Protuberances,l data. The maximum heat transfer rate, a major design parameter, is found to be fairly predicted by computations. However, accurate prediction of parameters such as upstream separation length and heat flux distribution requires further research and calibration of available turbulence models.