Ventilator
发表于 2025-3-27 00:05:34
Scanning Method of Temperature Distribution of Human Body by Device Registering Encircling Images, was created. The chapter concerns the description of merging algorithm of these images which is based on the mathematical formulas. In the final part of this chapter, some simulation results are shown.
avulsion
发表于 2025-3-27 02:02:50
http://reply.papertrans.cn/27/2686/268527/268527_32.png
evaculate
发表于 2025-3-27 09:03:39
http://reply.papertrans.cn/27/2686/268527/268527_33.png
轻而薄
发表于 2025-3-27 09:58:31
Book 2014aterial hybrids and modern joining technologies. Analytical modelling, numerical simulation, the application of state-of-the-art design tools and sophisticated experimental techniques are applied to characterize the performance of materials and to design and optimize structures in different fields of engineering applications.
不可思议
发表于 2025-3-27 17:40:38
Formal Models in the Study of Languageggregates can be used such as paving of vibrating tools. Analytical modeling (Hill model) is used. The analytically obtained results converge with those from experimental procedure and give a good agreement to other researcher’s works.
flaggy
发表于 2025-3-27 20:23:58
https://doi.org/10.1007/978-1-349-12144-1ig had stresses which were within the allowable range. The resultant stresses on the vertebral bodies were in line with those reported in the open literature. In the next step, a “quick” prototype was manufactured in a 3D printer (Dimension SST 1,200). Finally, a data acquisition system has been proposed.
NOCT
发表于 2025-3-27 22:19:37
Thanh-Hai Tran,Igor Konnov,Josef Widderw carbon steel and stainless steel. For the studied dissimilar welded material, mathematical models were developed to predict the required responses. Furthermore, the study of dissimilar were optimized by determining the best combinations of input process parameters in order to produce an excellent weld quality.
Proponent
发表于 2025-3-28 05:20:30
http://reply.papertrans.cn/27/2686/268527/268527_38.png
可商量
发表于 2025-3-28 08:41:55
Design and Manufacture of a Prototype of a Testing Rig for the Evaluation of the Biomechanical Behaig had stresses which were within the allowable range. The resultant stresses on the vertebral bodies were in line with those reported in the open literature. In the next step, a “quick” prototype was manufactured in a 3D printer (Dimension SST 1,200). Finally, a data acquisition system has been proposed.
机械
发表于 2025-3-28 14:25:37
http://reply.papertrans.cn/27/2686/268527/268527_40.png