Inoperable 发表于 2025-3-23 13:16:21
https://doi.org/10.1007/978-1-349-12144-1e vertebral specimens under compression, flexion and the combination of both loading cases. The dimensions of the porcine and human vertebrae were taken into account. Special attention was given to the design of the grips, in such a way that the range of movements of the spine is reproduced. The str揭穿真相 发表于 2025-3-23 14:20:17
Synthesis of procedural controllers,d articular ankilosys is reported. The required models were obtained with a computed axial tomography (CAT) in conjunction with computed aided design (CAD) and engineering codes. Several tomographic slices were taken digital format (DICOM). Each slice was processed with Scan IP, Unigraphics and Soli圆锥 发表于 2025-3-23 20:01:58
Ivan Lanese,Adrián Palacios,Germán Vidalt the middle of the pipe which was made from carbon steel with internal diameter of 83 mm, thickness 12.5 mm and length of 900 mm. Cut which was chosen was (5 × 10), (7 × 14) and (9 × 18) mm for the three pipes respectively. The composite repair was fiber glass woven roving (type E) reinforced withesculent 发表于 2025-3-23 23:54:51
Output-Sensitive Information Flow Analysis of results vary depending on the application and the field. This chapter explores the possibilities of application of computer vision in damage detection in materials. An example of damage detection in electronic components is presented, in which damage detection is based on the proposed computer vPURG 发表于 2025-3-24 02:28:13
http://reply.papertrans.cn/27/2686/268527/268527_15.png愉快吗 发表于 2025-3-24 09:51:55
Susanne Graf,Mahesh Viswanathansolve this problem, this paper proposes a hardware implementation of inverse kinematics control IP (Intelligent properties) for robot manipulators based on the FPGA technology. One robot is an articulated type robot manipulator and the other one a SCARA type robot manipulator. In this chapter, the fmonochromatic 发表于 2025-3-24 14:30:16
http://reply.papertrans.cn/27/2686/268527/268527_17.png两种语言 发表于 2025-3-24 14:56:29
Lecture Notes in Computer Scienceh an optimal design of experiments (DoE) are accomplished prior applying a multi-objective genetic algorithm (MOGA) based on a Kriging surrogate model. Fatigue life prediction and total geometry mass are taken as optimization objectives in this work, whose results can be validated against laboratory正面 发表于 2025-3-24 22:51:56
Extending Testing Automata to All LTLt important challenge is to apply composite materials in structural applications not only in racing vehicles or supercars, but also in mass-production vehicles. In this chapter is presented a real case study, that is the suspension wishbone arm (with convergence tie and pull-rod system) of the XAM 2MAOIS 发表于 2025-3-25 02:21:19
http://reply.papertrans.cn/27/2686/268527/268527_20.png