PET-scan
发表于 2025-3-28 16:42:34
Surface Roughness Prediction in Fused Deposition Modeling: An Engineered Modelmore, several parameters have also been proposed to assess the surface quality..Benefiting from advances in design strategies and methodologies of analysis, the aim of the current research was to provide further insight into the development of models for surface roughness prediction in FDM..The rela
JAMB
发表于 2025-3-28 21:43:06
http://reply.papertrans.cn/27/2685/268490/268490_42.png
conjunctivitis
发表于 2025-3-29 01:13:40
http://reply.papertrans.cn/27/2685/268490/268490_43.png
Jingoism
发表于 2025-3-29 06:09:54
http://reply.papertrans.cn/27/2685/268490/268490_44.png
高深莫测
发表于 2025-3-29 08:52:13
http://reply.papertrans.cn/27/2685/268490/268490_45.png
世俗
发表于 2025-3-29 15:16:26
Preliminary Study of a 3D-Printed High-Fidelity Simulator for the Training on the EBUS TBNA Procedurf Industrial Engineering of the University of Florence, under the request of the interventional pneumology ward. The model was validated by an expert medical doctor who assessed its anatomical accuracy and the suitability of its mechanical and acoustic properties..Moreover, the possibility of perfor
Dna262
发表于 2025-3-29 17:26:48
http://reply.papertrans.cn/27/2685/268490/268490_47.png
ANTE
发表于 2025-3-29 23:25:55
https://doi.org/10.1057/9781137337702d Stress, Ultimate Tensile Stress and elongation at fracture were investigated..Through ANOVA analysis it was found that the three parameters do not influence Young modulus (2.6 ÷ 3.2 GPa), while their combinations influence yield stress (36 ÷ 46 MPa), tensile strength (45 ÷ 74 MPa) and elongation a
BAIL
发表于 2025-3-30 02:16:03
Forest Estate Planning and Optimizationimensional precision ranged from IT9 to IT11..After sintering, the inaccuracy increased with the distance of samples from the building plane, in turn related to non-uniform shrinkage on sintering. Additionally, sintering determined worsening in the dimensional precision, which ranged from IT11 to IT
anachronistic
发表于 2025-3-30 07:28:30
http://reply.papertrans.cn/27/2685/268490/268490_50.png