硬化
发表于 2025-3-26 22:07:04
Conference proceedings 2024vanced methods for product and process design. This book provides academicsand professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing. .
Water-Brash
发表于 2025-3-27 03:18:36
http://reply.papertrans.cn/27/2685/268490/268490_32.png
骑师
发表于 2025-3-27 09:03:50
http://reply.papertrans.cn/27/2685/268490/268490_33.png
刺耳
发表于 2025-3-27 12:30:32
Investigation About the Impact of Nozzle and Chamber Temperatures and Infill Orientation on the Mechd Stress, Ultimate Tensile Stress and elongation at fracture were investigated..Through ANOVA analysis it was found that the three parameters do not influence Young modulus (2.6 ÷ 3.2 GPa), while their combinations influence yield stress (36 ÷ 46 MPa), tensile strength (45 ÷ 74 MPa) and elongation a
lymphoma
发表于 2025-3-27 15:31:45
Assessment of the Achievable Dimensional Tolerances in 17-4PH Stainless Steel Parts Fabricated by Meimensional precision ranged from IT9 to IT11..After sintering, the inaccuracy increased with the distance of samples from the building plane, in turn related to non-uniform shrinkage on sintering. Additionally, sintering determined worsening in the dimensional precision, which ranged from IT11 to IT
Exposure
发表于 2025-3-27 21:21:30
Effects of Printing Speed and Thermal Post-processing Treatments on the Mechanical Properties of PEEoduced the greatest outcomes in terms of ultimate tensile strength and elastic modulus, whereas the lowest printing speed produced the maximum strain at break. The thermal post-processing treatments revealed that the one carried out at lower temperatures resulted in negligible changes, while the oth
flavonoids
发表于 2025-3-27 22:40:17
FDM Technology: Overhangs versus Layer Height Printability Performance Correlationto investigate the relationship present between “layer height” and “support overhang angle”, bringing some examples of how with proper layer height one can significantly reduce support generation, wasted material and in some cases also printing time.
茁壮成长
发表于 2025-3-28 04:08:27
Prototyping a Mechanical Mounting System for the Photogrammetric Use of USB Microscopesveral skills, the work shows how the photogrammetric process can also be made accessible to devices that were not initially designed for such application, paving the way for new paths in representation engineering research.
custody
发表于 2025-3-28 07:54:30
http://reply.papertrans.cn/27/2685/268490/268490_39.png
敏捷
发表于 2025-3-28 13:38:10
Concurrent Product and Process Design of an Additively Manufactured Engine Pistonpected performance and a feasible PBF build layout. An automotive component is the use case, whose design based on topology optimization and product validation is enriched by integrating the associated process simulation. The build process is modeled by (a) the additive manufacturing simulation to i