figment
发表于 2025-3-28 16:49:53
http://reply.papertrans.cn/27/2649/264840/264840_41.png
ACE-inhibitor
发表于 2025-3-28 20:11:43
978-3-319-82454-3Springer International Publishing AG 2017
战役
发表于 2025-3-28 23:58:09
Time-Dependent Fracture Behaviour of Polymers at Impact and Quasi-Static Loading Conditionsas analysed both from the experimental and analytical point of view. For blends composed of polyurethane (TPU) and an acrylonitrile–butadiene–styrene copolymer (ABS), it has been shown that the stop block method in multiple-specimens technique is the most suitable method for determining R-curves at
消散
发表于 2025-3-29 03:14:24
http://reply.papertrans.cn/27/2649/264840/264840_44.png
gout109
发表于 2025-3-29 10:44:34
Fracture Mechanics Methods to Assess the Lifetime of Thermoplastic Pipesg methods. Uncertainties may arise from deviating parameters such as changes in environmental conditions, temperature, different loading ratios, chemicals such as stress cracking agents, etc. Only when these influences are known it is justifiable to go into lifetime calculations. Own studies showed,
Conspiracy
发表于 2025-3-29 13:16:22
http://reply.papertrans.cn/27/2649/264840/264840_46.png
Outspoken
发表于 2025-3-29 16:11:31
http://reply.papertrans.cn/27/2649/264840/264840_47.png
Neonatal
发表于 2025-3-29 21:07:25
Numerical Modelling of Damage Initiation and Failure of Long Fibre-Reinforced Thermoplasticspic behaviour is generally associated with parameters like fibre orientation, volume fraction and length. A thorough understanding of the micromechanical mechanisms gets more and more important for describing macroscopic behaviour. Large aspect ratios (fibre length divided by fibre diameter) make it
phlegm
发表于 2025-3-30 02:20:02
http://reply.papertrans.cn/27/2649/264840/264840_49.png
商议
发表于 2025-3-30 04:29:34
3D Reconstruction of Cracks in Polymers—New Insight into the Fracture Behaviour?nterpretations of the fracture behaviour of such polymers are based on results gained from completely fractured samples. To gain deeper insight into the fracture mechanisms the focus was put on the very early stages of the fracturing process. For this purpose tensile tests of the samples were stoppe