MURAL 发表于 2025-3-28 16:23:47

,Untersuchungen an einer 10 t-Meßdose,ic layer of thickness 2. subjected to equal and opposite concentrated forces on the two faces, as shown in Fig. .a. He showed that the normal traction on the plane of symmetry becomes tensile for ., where . is measured from the line of action of the forces. He deduced co

鞭子 发表于 2025-3-28 22:15:54

Mitteilungen über Forschungsarbeiteness, the cross section that minimizes the weight of the bar is a thin-walled cylinder, limited only by the requirement to avoid buckling of the walls and keep the envelope of the structure within externally prescribed dimensions. Thin-walled structures are also often found in the natural world, pres

AUGUR 发表于 2025-3-29 00:05:33

http://reply.papertrans.cn/24/2363/236269/236269_43.png

CESS 发表于 2025-3-29 05:34:00

http://reply.papertrans.cn/24/2363/236269/236269_44.png

牌带来 发表于 2025-3-29 07:36:38

http://reply.papertrans.cn/24/2363/236269/236269_45.png

周年纪念日 发表于 2025-3-29 15:10:36

https://doi.org/10.1007/978-3-662-02000-5ic deformations, though generally small, can therefore have a major effect on systems involving contact. Further interesting effects are introduced if the thermal boundary conditions at the interface are influenced by the mechanical contact conditions. The thermal and thermoelastic problems are then

albuminuria 发表于 2025-3-29 18:38:36

Contact Mechanics978-3-319-70939-0Series ISSN 0925-0042 Series E-ISSN 2214-7764

mercenary 发表于 2025-3-29 19:52:48

Umweltschutz in der schlanken Produktionng bodies can be approximated by half-spaces, this condition is satisfied if and only if Dundurs’ constant ., as defined in Eq. (.), the most common case being that in which the two bodies are of similar materials. We shall assume that . through Sects. .–. of this chapter.

ironic 发表于 2025-3-30 00:41:42

http://reply.papertrans.cn/24/2363/236269/236269_49.png

Confess 发表于 2025-3-30 07:48:36

http://reply.papertrans.cn/24/2363/236269/236269_50.png
页: 1 2 3 4 [5] 6
查看完整版本: Titlebook: Contact Mechanics; J.R. Barber Book 2018 Springer International Publishing AG 2018 Contact mechanics.Surface roughness.Idealized problems.