Jocose 发表于 2025-3-23 10:52:11

http://reply.papertrans.cn/24/2363/236269/236269_11.png

Arthropathy 发表于 2025-3-23 16:34:29

,Untersuchungen an einer 10 t-Meßdose, on the plane of symmetry becomes tensile for ., where . is measured from the line of action of the forces. He deduced correctly that if a single layer of thickness . were pressed against a frictionless rigid plane, the layer must lift off from the plane at the edges, as shown in Fig. .b.

Nostalgia 发表于 2025-3-23 19:44:43

http://reply.papertrans.cn/24/2363/236269/236269_13.png

hallow 发表于 2025-3-23 23:48:06

http://reply.papertrans.cn/24/2363/236269/236269_14.png

GROSS 发表于 2025-3-24 02:49:41

http://reply.papertrans.cn/24/2363/236269/236269_15.png

Militia 发表于 2025-3-24 07:53:56

http://reply.papertrans.cn/24/2363/236269/236269_16.png

Inertia 发表于 2025-3-24 14:07:03

Indentation Problems,Hertzian problem occurs at a depth of 0.48., where . is the radius of the contact circle and this point reaches both the Tresca and von Mises yield conditions when . where . is the yield stress in uniaxial tension (Johnson in Contact Mechanics, Cambridge University Press, Cambridge, 1985, Johnson 1985).

PAN 发表于 2025-3-24 15:05:32

http://reply.papertrans.cn/24/2363/236269/236269_18.png

Diaphragm 发表于 2025-3-24 21:15:29

http://reply.papertrans.cn/24/2363/236269/236269_19.png

指令 发表于 2025-3-25 02:52:12

https://doi.org/10.1007/978-3-662-01999-3 processes will typically cause differences in the properties of surface layers due to locally high strain rates and temperatures, and biological systems often involve thin layers of cartilage or other soft tissue supported on a harder substrate.
页: 1 [2] 3 4 5 6
查看完整版本: Titlebook: Contact Mechanics; J.R. Barber Book 2018 Springer International Publishing AG 2018 Contact mechanics.Surface roughness.Idealized problems.