Magisterial
发表于 2025-3-28 18:28:58
Indentation Creep in Semi-Brittle Materials,e method for assessing the time-dependent deformation of brittle materials, but the controlling mechanisms at lower temperatures are not well understood. Single crystal germanium is a good model material for a study of such behaviour, and Knoop indentation was carried out on n-doped material in the
Guileless
发表于 2025-3-28 20:34:57
On the Fracture Behavior of Rock Salt,t rig for cubic samples has been used for 240 tests on 8 different types of rock salt. The effects of varying mean stress, load geometry, and temperature on failure strength and residual strength are determined in load-controlled quasi-static tests. A failure criterion in the sense of a conservative
效果
发表于 2025-3-28 23:49:14
http://reply.papertrans.cn/24/2359/235900/235900_43.png
旅行路线
发表于 2025-3-29 03:16:08
http://reply.papertrans.cn/24/2359/235900/235900_44.png
贪婪的人
发表于 2025-3-29 08:04:14
http://reply.papertrans.cn/24/2359/235900/235900_45.png
嘲弄
发表于 2025-3-29 12:10:16
Inclusion of DSA Modeling Capability in Unified Viscoplasticity Theories, with Application to Incon.The material parameters of the modified Chaboche theory are evaluated and revised for superalloy Inconel 718 at 1100 °F (593 °C). Predictive capabilities of the theory are examined in monotonic tension, creep and cyclic loading. Predicted responses are also compared with experimental data and found
Mendicant
发表于 2025-3-29 16:55:23
Indentation Creep in Semi-Brittle Materials,p can take place, and the creep exponent increases throughout the temperature range studied. However beneath 〈100〉 indentations the slip systems activated are continually becoming locked as creep takes place. Thus whilst the creep exponent initially increases with temperature, it becomes dominated b
哎呦
发表于 2025-3-29 19:48:18
http://reply.papertrans.cn/24/2359/235900/235900_48.png
arboretum
发表于 2025-3-30 02:26:47
Why Should We Study Prisoner Victimisation?,shown to be consistent with a mechanism for scallop initiation and growth involving cyclic oxide cracking and cyclic ratchetting. The implementation of the results in the operating and lifing procedures of commercial aircraft engines parts is discussed.
原告
发表于 2025-3-30 07:17:00
http://reply.papertrans.cn/24/2359/235900/235900_50.png