必死 发表于 2025-3-23 12:39:18
http://reply.papertrans.cn/24/2359/235900/235900_11.pngCalculus 发表于 2025-3-23 15:44:01
http://reply.papertrans.cn/24/2359/235900/235900_12.pngRct393 发表于 2025-3-23 20:27:10
http://reply.papertrans.cn/24/2359/235900/235900_13.png贿赂 发表于 2025-3-24 01:54:29
Jeetendra Khadan,Inder Jit Ruprahorporates these different mechanisms. The effects of crack closure are discussed as is also the effect of an overload as influenced by ΔK level and thickness. The process referred to as anomalous crack growth is considered in terms of the development of crack closure in the wake of a newly formed faExpostulate 发表于 2025-3-24 04:03:20
Jeetendra Khadan,Inder Jit Ruprahtwo alloys chosen were Al-2024 based on Al-Cu-Mg and Al-8090 based on Al-Li-Cu-Mg-Zr. The alloys were fatigued in tension-tension where fatigue tests were interrupted at fractions of the expected fatigue life and specimens prepared for examination in the transmission electron microscope (TEM). Four-Torrid 发表于 2025-3-24 07:57:39
Advances in Science, Technology & Innovation5 in order to investigate the influence of strain rate, waveform and temperature on cyclic plastic instability. The results show that shape instability is a strong function of temperature and of strain waveform, while the effect of strain rate is relatively small. Transmission electron microscopy (T鸟笼 发表于 2025-3-24 10:42:51
Advances in Science, Technology & Innovationand. several fracture origin types were identified. These defects were then classified via their response to various elimination techniques. An elliptical crack model was used to characterize the correlation between fracture stress and fracture origin size. Consistent results showed that an order-of暗指 发表于 2025-3-24 16:02:15
http://reply.papertrans.cn/24/2359/235900/235900_18.png摘要记录 发表于 2025-3-24 22:27:25
http://reply.papertrans.cn/24/2359/235900/235900_19.png消息灵通 发表于 2025-3-24 23:10:09
http://reply.papertrans.cn/24/2359/235900/235900_20.png