无法破译
发表于 2025-4-1 02:38:34
Transactions of the Ninth Prague Conferencearings were then fitted into a gearbox and special detection techniques were used for extracting their signatures from the gearbox noise. All the ‘intentional’ faults were identified and fault diagnosis using the stress wave sensor method is hence assessed.
参考书目
发表于 2025-4-1 06:10:59
The Use of Stress Wave Sensors for the Diagnosis of Bearing Faultsarings were then fitted into a gearbox and special detection techniques were used for extracting their signatures from the gearbox noise. All the ‘intentional’ faults were identified and fault diagnosis using the stress wave sensor method is hence assessed.
LATHE
发表于 2025-4-1 12:15:11
http://reply.papertrans.cn/24/2353/235201/235201_63.png
AMITY
发表于 2025-4-1 15:37:21
Transactions of the Tenth Prague Conferencesing without the spurious noise of the machine and to evaluate the influence of the main punching parameters on the acoustic emission behaviour. According to these results, the possibilities of punching monitoring were clearly demonstrated in quasi static tests although they must be confirmed in industrial environment.
勋章
发表于 2025-4-1 21:42:55
https://doi.org/10.1007/978-94-010-9913-4ower used in grinding is simple and it does not interfere with the normal grinding operation. Evaluation of recorded power can provide important information about wheel sharpness and grinding stiffness. This information can be used to optimise for a burn free grinding.
手铐
发表于 2025-4-1 23:59:46
https://doi.org/10.1007/978-3-540-75162-5 by an induction motor and loaded by a dc generator were comparable with those of the theoretical model. Similar measurements from a crankshaft are being carried out to derive information relating to engine health.