Chivalrous
发表于 2025-3-28 18:28:46
http://reply.papertrans.cn/24/2319/231840/231840_41.png
职业拳击手
发表于 2025-3-28 21:03:26
Fibre Reinforced Polymer Built-Up Beams and One-Way Slabs,posite action at both serviceability and ultimate loads, depending on the quality of the bond. Finally, structural theory was used to estimate the bending stiffness and load-carrying capacity of the sandwich specimens and good agreement with the experimental results was found.
BABY
发表于 2025-3-29 02:21:04
Fibre Reinforced Polymer Composites Two-Way Slabs, whereas those with bidirectional orientation showed local out-of-plane buckling of the upper flat panel. The unidirectional slab also showed greater bending stiffness than bidirectional slabs due to the weak in-plane shear stiffness provided by the web-core profiles, which introduced partial compos
安定
发表于 2025-3-29 04:56:28
http://reply.papertrans.cn/24/2319/231840/231840_44.png
恸哭
发表于 2025-3-29 07:13:49
Composite Actions of Steel-Fibre Reinforced Polymer Composite Beams,t. The experimentally derived shear connector stiffness was then used in a proposed design formulation to predict the bending stiffness of modular steel-FRP composite beam systems, considering two kinds of partial composite actions. These were the composite action provided by the blind bolt shear co
jealousy
发表于 2025-3-29 13:13:49
http://reply.papertrans.cn/24/2319/231840/231840_46.png
油毡
发表于 2025-3-29 19:18:37
http://reply.papertrans.cn/24/2319/231840/231840_47.png
鄙视读作
发表于 2025-3-29 21:41:54
Fibre Reinforced Polymer Columns with Bolted Sleeve Joints under Eccentric Compression, developed from the initiative longitudinal cracks in the bolted sleeve joint region at the end of the columns was found as the ultimate failure, after the large lateral deformation. FE analysis presented satisfactory agreements with experimental results; furthermore, the stress analysis in the crit
摊位
发表于 2025-3-30 00:41:27
http://reply.papertrans.cn/24/2319/231840/231840_49.png
飓风
发表于 2025-3-30 07:49:56
Connections of Fibre Reinforced Polymer to Steel Members: Numerical Modelling,otation curves and strain responses. Parametric studies were then undertaken to investigate the structural behaviour of the bonded sleeve connections considering the effects of major design parameters such as endplate thickness, bonding length, number of bolts, etc. It was found that the endplate th