切掉
发表于 2025-3-23 12:06:40
Verbindung mit der Thermodynamik, Entropieltruded glass fibre reinforced polymer (GFRP) studs may provide an alternative solution considering their light weight and improved durability. However, integrating the GFRP wall studs to a steel frame structure is challenging, as proper connection methods are required. A sleeve connection was propo
Prosaic
发表于 2025-3-23 15:46:34
http://reply.papertrans.cn/24/2319/231840/231840_12.png
Coeval
发表于 2025-3-23 19:18:27
Virialentwicklung zweiter Ordnung Specimens with different endplate thickness and number of bolts are examined under cyclic loading. The hysteretic moment-rotation responses of specimens, including rotational stiffness, ultimate moment and rotation capacity, and local strain responses are experimentally obtained and comparatively i
jettison
发表于 2025-3-24 01:37:33
http://reply.papertrans.cn/24/2319/231840/231840_14.png
BIAS
发表于 2025-3-24 05:40:51
http://reply.papertrans.cn/24/2319/231840/231840_15.png
Diastole
发表于 2025-3-24 09:52:55
Virialentwicklung erster Ordnungction specimens, each consisting of a steel bolted flange joint between two hollow section steel-FRP bonded sleeve joints, are prepared in three configurations with difference in bolt arrangement or bond length. Correspondingly, detailed finite element (FE) models are constructed with consideration
osteocytes
发表于 2025-3-24 13:24:33
Virialentwicklung zweiter Ordnungce sheets, further with glass magnesium (GM) or gypsum plaster (GP) panels on the surface for fire protection. The structures were subjected to ISO 834 fire curve from underside where the GM or GP panels were installed and a constant load on top to introduce bending during fire exposure. Experimenta
不在灌木丛中
发表于 2025-3-24 15:14:04
https://doi.org/10.1007/3-540-29381-7e also found their places in civil engineering. The use of glass fibers (therefore GFRP) further reduces material costs and incorporates beneficial environmental aspects such as low energy consumption and low carbon dioxide emissions. Pultrusion is an automated and economical manufacturing method fo
压碎
发表于 2025-3-24 20:31:44
https://doi.org/10.1007/978-981-19-4278-5Fiber Reinforced Polymer Composites; Glass Fiber; Polymer Resin; Design for Manufacturing and Assembly;
要求比…更好
发表于 2025-3-25 02:07:17
978-981-19-4280-8The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapor