异端邪说2
发表于 2025-3-26 22:29:01
„Aufsiedlungsmanagement“ in Neubauquartierenors, etc.) and checked its electrical performance. If the result was not satisfactory, the discrete elements were changed in value and/or type, until the electrical specifications were met. This empirical procedure was called breadboarding. With the advent of the integrated circuit this method was no longer appropriate, mainly for two reasons:
前兆
发表于 2025-3-27 04:39:20
Das Selbst in der sozialen Kommunikation,rain current, threshold voltage, carrier mobility in an inversion layer, the saturation mode, dynamic operation and inherent parasitics. Unless stated otherwise, the device structure considered here is that of an .-channel transistor. In most cases, a .-channel device only needs a change of sign to produce its model formulas.
伪书
发表于 2025-3-27 07:43:45
http://reply.papertrans.cn/24/2309/230803/230803_33.png
colostrum
发表于 2025-3-27 12:52:45
http://reply.papertrans.cn/24/2309/230803/230803_34.png
Paraplegia
发表于 2025-3-27 14:53:23
http://reply.papertrans.cn/24/2309/230803/230803_35.png
HAUNT
发表于 2025-3-27 20:54:51
Process and Geometry Dependence, Optimization and Statistics of Parameters,. The dimensions must be known in silicon because only the real dimensions are electrically significant. They are determined by the dimensions of the mask, corrected for such effects as outdiffusion, underetching, misalignment of masks, encroachment of isolation oxides, etc.
archenemy
发表于 2025-3-28 00:57:03
,Welche Störungsbilder gibt es?,implanted .-type layer in an n-well (bipolar IC-compatible JFET) or as an epitaxial layer on a semi-insulating substrate (GaAs MESFET). In the latter case a channel implant is often added for achieving better process control. Figs. 9.1 a and 9.1 b give a cross-section of the JFET and the MESFET, respectively.
senile-dementia
发表于 2025-3-28 03:48:15
http://reply.papertrans.cn/24/2309/230803/230803_38.png
BUOY
发表于 2025-3-28 07:03:34
https://doi.org/10.1007/978-3-658-25759-0onsidered here is that of a vertical . transistor. In most cases the vertical . transistor only needs a change of sign in its model formulas. The lateral . transistor, which is quite different, will be treated in a separate chapter.
CESS
发表于 2025-3-28 13:46:03
http://reply.papertrans.cn/24/2309/230803/230803_40.png