过分自信
发表于 2025-3-23 13:14:32
Mechanical Properties of SiO2 Coatings for Corrosion Protection of 304 Stainless Steelgs, tetraethilorthosilicate (TEOS) and 3-(Trimethoxysilyl)propyl methacrylate are used as precursors for the SiO. layers formation. The mechanical properties of the SiO. coating were evaluated by tensile and Vickers microindentation hardness tests, while corrosion resistance is characterized by potentiodynamic measurements.
CBC471
发表于 2025-3-23 15:30:15
http://reply.papertrans.cn/23/2240/223991/223991_12.png
FISC
发表于 2025-3-23 21:23:12
http://reply.papertrans.cn/23/2240/223991/223991_13.png
角斗士
发表于 2025-3-23 23:40:06
http://reply.papertrans.cn/23/2240/223991/223991_14.png
关心
发表于 2025-3-24 05:53:47
http://reply.papertrans.cn/23/2240/223991/223991_15.png
小争吵
发表于 2025-3-24 08:55:53
http://reply.papertrans.cn/23/2240/223991/223991_16.png
不足的东西
发表于 2025-3-24 11:09:04
https://doi.org/10.1007/978-1-4302-0532-6ctures, generally associated with the heat-affected zone (HAZ). For this reason, it is very important to know the behavior of this area before welding. This paper presents a study of the thermal behavior and its effect on phase transformations in the HAZ, depending on cooling rates (0.1–200 .C/s) to
convert
发表于 2025-3-24 16:29:15
Investment Tracking with Fidelityndergo heat treatment at a temperature of 1000 .C for 30 min. The formation of microstructures are obtained at temperatures of 204, 315, 426, 538, and 650 .C for 30 min and cooled in water. The permeation tests were carried out according to the modified Devanathan-Starchurski setup. Microstructural
连词
发表于 2025-3-24 20:50:39
Connecting Your Reports to the Worldave been reported in all kinds of metals and their alloys, but until now the effect of corrosion has had no a real solution. The aim of the present is to produce monolayers of silicon oxide on 304 stainless steel sheets using the sol-gel and dip-coating processes, which have been widely employed due
molest
发表于 2025-3-24 23:37:53
http://reply.papertrans.cn/23/2240/223991/223991_20.png