Fibrin
发表于 2025-3-28 16:28:18
Effect of Thermal and Mechanical Damage on Phase Separation, Crosslink Density, and Polydispersity ions with a higher hard segment (HS) to soft segment (SS) ratio tend to be more crosslinked. It is also observed that the swelling capacity is decreasing for polyurea with higher HS/SS ratio. It is concluded that the polyurea nanostructure can substantially affect its resistivity against thermal and
defuse
发表于 2025-3-28 21:28:12
http://reply.papertrans.cn/23/2235/223475/223475_42.png
cutlery
发表于 2025-3-29 00:18:48
http://reply.papertrans.cn/23/2235/223475/223475_43.png
提升
发表于 2025-3-29 05:12:29
Challenges in Mechanics of Time Dependent Materials, Volume 2Proceedings of the 2
跳脱衣舞的人
发表于 2025-3-29 07:37:03
Characteristics of Network Architectures, tests with different durations and measuring the corresponding residual strains. The variation of yield strains is presented with respect to stress levels and temperature. A free energy-based criterion combined with nonlinear free volume model is proposed for predicting yielding of StratoFilm 420.
Rustproof
发表于 2025-3-29 13:53:41
http://reply.papertrans.cn/23/2235/223475/223475_46.png
itinerary
发表于 2025-3-29 17:28:02
Introduction to Telecommunication Systems,xpression of the notched beam’s Young modulus of notched beam (goal of this study); (3) the validation of the model at the end shows that the evolution of the experimental data and the analytical data have a good fit.
Hypomania
发表于 2025-3-29 20:52:42
The Engset Loss and Delay Systems,e relaxation rate a distinction must be made between short-term and long-term behavior. Typically, the long-term behavior can be described with an exponential approach. Depending on the strain rate, which was used to settle the starting stress, a more or less pronounced short-time relaxation is obse
Contort
发表于 2025-3-30 01:58:40
http://reply.papertrans.cn/23/2235/223475/223475_49.png
防水
发表于 2025-3-30 08:05:17
http://reply.papertrans.cn/23/2235/223475/223475_50.png