Coordinate
发表于 2025-3-25 06:44:31
http://reply.papertrans.cn/23/2235/223475/223475_21.png
flaunt
发表于 2025-3-25 09:57:33
The Engset Loss and Delay Systems,e the effects are usually assumed to be small and therefore not relevant for the failure of components. However, relaxation effects may become important, particularly with regard to the prediction of the residual stress state or the distortion state arising from shot peening or jigging of components
bibliophile
发表于 2025-3-25 12:04:16
http://reply.papertrans.cn/23/2235/223475/223475_23.png
Hectic
发表于 2025-3-25 18:51:51
The Erlang Loss and Delay Systems,of soft materials. These materials exhibit viscoelastic properties which makes them difficult to determine the mechanical properties through conventional means. In addition, the material properties are highly dependent on their concentration ratios—wt./wt. for PDMS and wt./solvent volume for agarose
Psa617
发表于 2025-3-25 23:24:59
The Erlang Loss and Delay Systems,ures with oxidative degradation. Maximization of the rate of entropy production is applied to develop the material model. The oxidation treatment, Parthasarathy et al. (J Am Ceram Soc 101:973–997, 2018), is applied both for points with direct atmospheric exposure via damage, as well as for diffusing
Leisureliness
发表于 2025-3-26 03:59:55
The Engset Loss and Delay Systems,riants microstructure and molecular transitions. Different polyurea formulations are distinguished by the difference in their pre-polymer mixing ratios, including the chain length distribution of diamines. Virgin, cavitation-erosion damaged, and undamaged (exposed to water) along with annealed polyu
prediabetes
发表于 2025-3-26 08:10:58
http://reply.papertrans.cn/23/2235/223475/223475_27.png
不利
发表于 2025-3-26 10:07:53
http://reply.papertrans.cn/23/2235/223475/223475_28.png
OVER
发表于 2025-3-26 14:48:27
http://reply.papertrans.cn/23/2235/223475/223475_29.png
Arboreal
发表于 2025-3-26 19:01:04
http://reply.papertrans.cn/23/2235/223475/223475_30.png