无能性
发表于 2025-4-1 03:10:08
A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-Deforming Composite Mater the higher-gradient nature of the interactive forces between constituents. These body forces are essential in the descriptions of the intracell behaviors included in the force balances of each constituent. The model may be both applied to solid composites, e.g. for interrogating the damage and fail
轻而薄
发表于 2025-4-1 06:12:54
Effect of Temperature and Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composimperature and moisture on the tensile properties of nylon 6 composites reinforced with discontinuous and continuous fibers. Plasticizing effects are observed with increasing moisture content and temperature (98 degrees Celsius) but these effects are reversed at 150 degrees Celsius due to hydrolysis
缝纫
发表于 2025-4-1 12:57:21
Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyws that polymeric materials with high damping factor tan δ exhibits lower stiffness compared to polymeric materials with lower damping factor. Due to their insufficient stiffness polymers with better damping are often not being used for vibration isolation. In addition, elastomeric materials with hi
欢乐中国
发表于 2025-4-1 16:21:24
Impact of Hydro-Mechanical Loadings on Rupture Process in Wood Material,ed structures. In this case, the rupture in mixed mode coupling mechanical hydric and thermal loads for orthotropic materials is studied. The analytical formulation of the energy release rate is introduced by the T and A integrals generalized to mixed mode crack growth. The time dependent effects ar
指令
发表于 2025-4-1 19:44:50
http://reply.papertrans.cn/23/2235/223473/223473_65.png
浓缩
发表于 2025-4-2 00:46:28
http://reply.papertrans.cn/23/2235/223473/223473_66.png
Constrain
发表于 2025-4-2 03:13:59
Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Buo be solved. If thin films have better mechanical properties, it can not only reduce the creep behavior, but also extend its lifetime..In this study, we use solid solution strengthening to improve the mechanism of the material, adding foreign atom Mg to Al thin films in order to increase the resista