打谷工具
发表于 2025-3-25 06:57:26
Sergio Rosales-Mendoza,Omar González-Ortegahining. CNC machines the basic concepts of the machine are to control the motion of the tool, by means of set of instruction, which are prepared by programmer of operator. The set of programmed instructions are called the “program” or part programming of CNC machine tool. These instructions are only
袖章
发表于 2025-3-25 09:56:10
http://reply.papertrans.cn/23/2204/220379/220379_22.png
zonules
发表于 2025-3-25 12:00:35
Environment and Remediation Applications,re being used while preparation of part programs. The major challenge in the part programming phase of the Milling operation is to deal with various complex shapes and structure to be machined which requires a complicated set of part programs that needs to be highly efficient, less time consuming an
最初
发表于 2025-3-25 17:08:16
http://reply.papertrans.cn/23/2204/220379/220379_24.png
deriver
发表于 2025-3-25 20:24:46
http://reply.papertrans.cn/23/2204/220379/220379_25.png
Femine
发表于 2025-3-26 03:59:15
http://reply.papertrans.cn/23/2204/220379/220379_26.png
rods366
发表于 2025-3-26 06:05:19
http://reply.papertrans.cn/23/2204/220379/220379_27.png
Intractable
发表于 2025-3-26 10:22:37
http://reply.papertrans.cn/23/2204/220379/220379_28.png
CYT
发表于 2025-3-26 13:38:47
http://reply.papertrans.cn/23/2204/220379/220379_29.png
ACME
发表于 2025-3-26 18:50:25
http://reply.papertrans.cn/23/2204/220379/220379_30.png