indignant 发表于 2025-3-28 15:36:16
http://reply.papertrans.cn/19/1880/187971/187971_41.png追逐 发表于 2025-3-28 21:45:27
http://reply.papertrans.cn/19/1880/187971/187971_42.png爱得痛了 发表于 2025-3-29 00:04:52
http://reply.papertrans.cn/19/1880/187971/187971_43.png阻塞 发表于 2025-3-29 06:41:43
Knowledge Management and Knowledge Sharinge of stress and motion homeostatic responses of these tissues has been recognized only in recent years. Atrophy and a decrease in strength of smaller bones following physical disuse has been documented first by Allison and Brooks (1) and later by others (2-4). Recently, Klein, et al (5) showed signicarotenoids 发表于 2025-3-29 07:39:27
Knowledge Management and Knowledge Sharinge last decade. These devices have the major limitation that the instantaneous distribution of force or pressure can only be described by a single point — the center of pressure — which identifies the geometric centroid of the applied force distribution. This measure sometimes has very little relevan一起 发表于 2025-3-29 14:26:24
Safety and Security Knowledge Management any progress was made in the development of materials really suited to intra-oral use. Several of our currently used materials had their origin at that time as by-products of the Industrial Revolution. Among these materials was amalgam.Enrage 发表于 2025-3-29 17:18:35
https://doi.org/10.33283/978-3-86298-662-0ct to the durability of the implantation. The aim of a lasting implantation is mainly submitted to the wear of the prosthesis: thus, a need of better wear-resistant materials appears. Otherwise, other prosthetic joint replacements are still unsatisfactory because of unsufficient mechanical and wear幻想 发表于 2025-3-29 19:49:37
http://reply.papertrans.cn/19/1880/187971/187971_48.pngGULLY 发表于 2025-3-30 03:40:52
Kroatisch - Deutsch für die Pflege zu Hauseent for fixation of the cup-prosthesis can be considered as weak points in this system. Thus long-term anchoring of loaded joint replacements is mainly an interfacial problem provided that no biomechanical discrepancy exists. The aim of this investigation was to study a physiologically loaded prosthfigurine 发表于 2025-3-30 05:22:26
http://reply.papertrans.cn/19/1880/187971/187971_50.png