pacifist
发表于 2025-3-23 12:23:06
Research Management in Biomechanicss. These investigators, whether involved principally in biology, medicine or enginering, come to the research with different backgrounds, aspirations and professional languages, sometimes making communication difficult.
anticipate
发表于 2025-3-23 17:02:23
Knowledge Management and Knowledge Sharing This painful situation for the subject resulted in center of pressure patterns (fig 1a) which were virtually identical. The pressure patterns, however, revealed a small peak in the location of the marble coincident with the subject’s pain.
Stricture
发表于 2025-3-23 21:19:39
http://reply.papertrans.cn/19/1880/187971/187971_13.png
KEGEL
发表于 2025-3-24 00:30:55
http://reply.papertrans.cn/19/1880/187971/187971_14.png
–DOX
发表于 2025-3-24 02:47:27
http://reply.papertrans.cn/19/1880/187971/187971_15.png
Granular
发表于 2025-3-24 07:55:43
Kroatisch - Deutsch für die Pflege zu Hausey an interfacial problem provided that no biomechanical discrepancy exists. The aim of this investigation was to study a physiologically loaded prosthesis which was implanted cement-free and coated with glass ceramic particles.
门闩
发表于 2025-3-24 10:53:04
Kroatisch - Deutsch für die Pflege zu Hauseosthesis is chosen as to account for the remodelling ability of the bony tissue concerned well load transmitting interfaces and structures for direct (ancylotic) anchorage of the prosthetic device can be achieved (2). This had been demonstrated in animal experiments and confirmed by the discovery of the “load-line-shadow-effect” (3).
brother
发表于 2025-3-24 16:16:30
Haruto Domoto,Takahiro Uchiya,Ichi Takumisurface compressive residual stresses are common techniques to improve the fatigue life of metal parts. The process of shot peening involves hammering the surface with small beads and is ideal for bone implants with complicated shapes.
Functional
发表于 2025-3-24 19:25:51
Evaluation of Tissue Tolerance to Carbon-Silicon Carbide, Alumina and PTFE-Grafted Polyethylene Partwear-resistant materials appears. Otherwise, other prosthetic joint replacements are still unsatisfactory because of unsufficient mechanical and wear resistances of the materials referred to the applied stresses. Again, progress must flow from development of new materials.
CUB
发表于 2025-3-25 00:45:49
Cement-Free Fixation of Cup-Prosthesis with Glass Ceramic Coating in Dogsy an interfacial problem provided that no biomechanical discrepancy exists. The aim of this investigation was to study a physiologically loaded prosthesis which was implanted cement-free and coated with glass ceramic particles.