staging
发表于 2025-3-26 23:27:09
IntroductionThe following are foundational assumptions for continuum mechanics:
hurricane
发表于 2025-3-27 03:30:46
Instability in Simple Tension TestAs discussed in Chap. ., the UTS (ultimate tensile strength) point observed in the simple tension test for both sheet and bulk specimens is important as it is the limit of uniform deformation in the gauge length, which is analyzed here.
朝圣者
发表于 2025-3-27 07:16:46
Physical PlasticityPhysical plasticity deals with issues relevant to plastic deformation in the microstructural level, which is therefore beyond the scope of continuum plasticity. However, a few basic features are briefly reviewed here, since these provide some theoretical foundations of continuum plasticity, as will be discussed later.
相同
发表于 2025-3-27 11:07:49
Pure Bending and Beam TheoryThe deflection of a beam, defined as a uniform long straight slender bar under transverse loading, is discussed here.
钉牢
发表于 2025-3-27 17:01:42
TensorsThe stress with nine components derived in Eq. (.) is a tensor. The main task of tensors is to transform one vector to another; i.e.,
洁净
发表于 2025-3-27 18:31:29
http://reply.papertrans.cn/19/1813/181246/181246_36.png
减震
发表于 2025-3-27 23:40:59
http://reply.papertrans.cn/19/1813/181246/181246_37.png
FLOUR
发表于 2025-3-28 02:52:23
http://reply.papertrans.cn/19/1813/181246/181246_38.png
有角
发表于 2025-3-28 09:39:12
Plane Stress State for SheetsWhen plasticity is applied to thin sheets such as membranes, plates and shells, the yield function and the plastic strain increment function as well as their applications to the dual normality rules become simpler.
孵卵器
发表于 2025-3-28 12:05:59
Hardening Law for Evolution of Yield SurfaceInthe past few decades, a few experimentations have been conducted to better understand the evolution of the yield surface during plastic deformation.