分期付款
发表于 2025-3-23 12:47:19
http://reply.papertrans.cn/19/1813/181246/181246_11.png
Isthmus
发表于 2025-3-23 14:24:09
http://reply.papertrans.cn/19/1813/181246/181246_12.png
闪光东本
发表于 2025-3-23 21:45:15
http://reply.papertrans.cn/19/1813/181246/181246_13.png
Daily-Value
发表于 2025-3-23 23:18:30
http://image.papertrans.cn/b/image/181246.jpg
龙虾
发表于 2025-3-24 02:57:22
Paul Watson,Mike Ward,Ken Hoyleormation of materials under external forces in continuum mechanics. However, mechanical properties that address all the relationships between stress and strain measures under various conditions are so diverse that measuring them, even only partially, remains as one of the most challenging technical
不可接触
发表于 2025-3-24 09:07:02
https://doi.org/10.1007/BFb0037125inant at room temperature for most metals with a few exceptions. As for the shear stress to induce the plastic deformation, known as the ., its true magnitude is much lower than the theoretical value, with sliding facilitated by dislocations, on a single crystal level.
空气
发表于 2025-3-24 10:51:31
Lecture Notes in Computer Scienceicity with infinitesimal deformation for a circular cylinder. The uniform circular cross-section may have an arbitrary size (with the radius of ‘a’ here). Note that the pure bending also has the exact analytical solution of the linear isotropic elasticity but its object may have an arbitrary cross-s
MEN
发表于 2025-3-24 17:15:25
http://reply.papertrans.cn/19/1813/181246/181246_18.png
MOTTO
发表于 2025-3-24 20:27:47
http://reply.papertrans.cn/19/1813/181246/181246_19.png
Coronation
发表于 2025-3-24 23:52:03
https://doi.org/10.1007/978-3-642-31229-8ormality rule to define the directions of plastic deformation (for elasto-plasticity) or the stress (for rigid-plasticity) and hardening behavior to describe the yield surface evolution during plastic deformation.