Obsessed
发表于 2025-3-23 11:07:18
Relation Between Applied Traverse Speed and Quality of Metal Surfaces Created by Abrasive Water Jetuality of the material to be cut, which can be described by roughness (.) and waviness . values, is challenging and is related to the setting of the jet parameters. The traverse speed of the cutting head was selected as the most suitable parameter that can influence the roughness and waviness, as it
GUILE
发表于 2025-3-23 15:06:19
Influence of Erosion Time on HVOF-Sprayed Cermet Coating: Preliminary Study,ticle abrasion. These coatings represent the option on how to protect the substrate in many areas of industrial applications. However, the possible resistance of the coating to the adverse conditions of high-frequency water droplets is still not well investigated. This study deals with the assessmen
分散
发表于 2025-3-23 21:40:33
Influence of Abrasive Water Jet Cutting Parameters on the Surface Properties of Modern Plain Bearinerial for Permaglide plain bearings with the P10 designation used in the tests is characterized by a very low tendency to stick-slip vibrations, high wear resistance, good chemical resistance, low coefficient of friction, no tendency to weld with metal, resistance to swelling and a very important fe
牢骚
发表于 2025-3-24 01:33:23
Investigations on the Influence of Small Impact Angles for Abrasive Water Injector Jet Cutting of Hhining is struggling to machine these materials cost-efficiently due to high costs and wear of tools. Trimming, a multilevel near-net-shape pre-contouring with multistage abrasive water injector jet cutting (AWIJC), could solve these problems. While machining three-dimensional components, process pa
nettle
发表于 2025-3-24 04:58:53
Preliminary Investigation of the Cutting Edge Preparation of Carbide Tools Using the Abrasive Watercks, a cutting edge preparation process can be applied. As a novel technology, the high-pressure abrasive water injection jet technology can be used. The small jet diameter and high abrasive particle velocity result in an efficient material removal localized directly on the cutting edge. In this res
Delude
发表于 2025-3-24 07:07:44
Influence of Phase Composition in an Injection-Type Abrasive Slurry Jet (iASJ),ages when cutting those high-performance materials. However, milling with AWJ requires refinement to gain comprehensive knowledge of the process design. This study explores an experimental comparison of commonly used AWJ and an injection-type Abrasive Slurry Jet (iASJ). The gaseous phase in the jet
组装
发表于 2025-3-24 13:12:03
Experimental Characterisation of the Secondary Jet in Abrasive Water Jet Machining on the Example oorkpiece engagement. The focus was on analysing the direction and damage potential of the secondary jet when machining an oxide ceramic. To better understand the deflection of the abrasive water jet, the formation of the cutting front was first examined utilising analogy tests on transparent glass m
BALE
发表于 2025-3-24 18:08:22
Use of Accelerated-Hydro-Abrasive-Cavitation-Erosion (AHACE) Method to Investigate the Erosion Resion based on special application of abrasive water jets. Erosion resistance was tested on large samples of nine rock types from various quarries in Czechia (granite, gneiss, basalt, granodiorites, metabasites and marbles). New surfaces created after the application of simulative erosion flows were an
合并
发表于 2025-3-24 21:17:29
Influence of Liquid Viscosity on the Origin and Propagation of Self-Excited Oscillations, of a fluidic oscillator and at its outlet to the air environment. The generation and propagation of self-excited oscillations was monitored at several levels of inlet pressure values (5, 10, 15, 20 and 25 bar) and two flowing fluid consternations of the ethylene glycol (EG) (EG 100% and EG 90% with
合唱队
发表于 2025-3-25 02:26:45
Conference proceedings 2025nics of the Czech Academy of Sciences. It covers research and developments of water jets, and their applications in cutting, machining, cleaning, surface treatment, and milling. Further topics include the use of water jets in the removal of coatings and layers, jet grouting, jet observation and para