人充满活力
发表于 2025-3-26 22:08:28
Das innere oder skalare Produkt many solutions is presented. The singularities of this manipulator are derived and interpreted geometrically. Finally, the workspace of this manipulator accounting for the joint limits of each X-joint is visualized.
繁荣地区
发表于 2025-3-27 04:42:21
Adalbert Duschek,August Hochrainerace properties of the mechanism and the physical characteristics of its actuators. In particular, one takes advantage of the coaxiality of the input shafts of the CoSPM and the resulting unlimited bearing.
Ascribe
发表于 2025-3-27 05:24:30
http://reply.papertrans.cn/17/1674/167310/167310_33.png
标准
发表于 2025-3-27 10:24:52
http://reply.papertrans.cn/17/1674/167310/167310_34.png
滑动
发表于 2025-3-27 15:41:26
http://reply.papertrans.cn/17/1674/167310/167310_35.png
PALL
发表于 2025-3-27 20:24:09
http://reply.papertrans.cn/17/1674/167310/167310_36.png
parsimony
发表于 2025-3-28 00:29:11
https://doi.org/10.1007/978-3-642-73806-74R four-bar linkage. Also variations of the balanced designs are presented. As compared to the planar balanced pantograph, the same underlying system of principal vectors exists, of which the geometries can be visualized in the orthogonal planes. The feasible variations of link lengths for which force balance is maintained are discussed.
外向者
发表于 2025-3-28 05:02:47
http://reply.papertrans.cn/17/1674/167310/167310_38.png
Nonflammable
发表于 2025-3-28 09:19:11
Inherently Balanced Spherical Pantograph Mechanisms,4R four-bar linkage. Also variations of the balanced designs are presented. As compared to the planar balanced pantograph, the same underlying system of principal vectors exists, of which the geometries can be visualized in the orthogonal planes. The feasible variations of link lengths for which force balance is maintained are discussed.
轻推
发表于 2025-3-28 10:37:39
,A Schönflies Motion Generator Actuated by Four In-Parallel Sliding Joints with a Single Mobile Plat singularity identification. The dexterity and singularity analysis is carried out, where a singularity-free workspace with high rotational capability (i.e., half-circle rotation) is found. A CAD model is built to show that the robot architecture allows more robots to be installed along the production line side by side to improve the productivity.