MILL
发表于 2025-3-30 12:09:03
http://reply.papertrans.cn/17/1673/167284/167284_51.png
左右连贯
发表于 2025-3-30 15:47:14
Welding of Ti-6Al-4V Alloy: A Reviewas always been a challenging task because of its great affinity towards atmospheric gases at elevated temperature. Through this article, an attempt has been made to congregate the various shielding techniques used till date for creating inert atmosphere around the weld pool during the welding of Ti-
CREEK
发表于 2025-3-30 17:35:35
http://reply.papertrans.cn/17/1673/167284/167284_53.png
平庸的人或物
发表于 2025-3-30 21:55:57
Effect of Processing Route During Double-Pass FSP Along with Low Heat Input in the Second Pass on thf the AZ31B alloy was experimentally examined at 450 °C and 1.3 × 10. S. strain rate. Double-pass friction stir processing is found to be the advanced processing technique that results in grain refinement. Mainly, two processing parameters, i.e., tool rotational speed and tool traverse speed, play a
招待
发表于 2025-3-31 04:39:30
http://reply.papertrans.cn/17/1673/167284/167284_55.png
Vital-Signs
发表于 2025-3-31 06:10:33
https://doi.org/10.1007/978-3-658-28390-2Taguchi method was used to plan the experiments, which employed an L25 orthogonal array. The response variable was surface roughness (Ra). The results showed that . is the most influencing turning parameter. Ra is influenced only slightly by . and ..
LIKEN
发表于 2025-3-31 09:57:24
https://doi.org/10.1007/978-3-658-28390-2nd surfactants. The relative analysis of several nanoparticles in this work demonstrates the improvement in wear and friction that was made, as well as the least value of the coefficient of friction (COF). A better understanding of the functions of nanoparticles in lubricant oil efficacy is one of t