Bone-Scan 发表于 2025-3-25 07:14:39
http://reply.papertrans.cn/17/1673/167284/167284_21.png温和女人 发表于 2025-3-25 08:20:01
Grundzüge der pathologischen Physiologief the AZ31B alloy was experimentally examined at 450 °C and 1.3 × 10. S. strain rate. Double-pass friction stir processing is found to be the advanced processing technique that results in grain refinement. Mainly, two processing parameters, i.e., tool rotational speed and tool traverse speed, play a侵略者 发表于 2025-3-25 13:36:18
Conference proceedings 2024cturing, including metal-based additive manufacturing, polymer-based additive manufacturing, and hybrid additive manufacturing. The book is useful for researchers and professionals working in the field of manufacturing sciences..esthetician 发表于 2025-3-25 17:40:24
http://reply.papertrans.cn/17/1673/167284/167284_24.png刺激 发表于 2025-3-25 23:21:13
Hans-Peter Kruse,Friedrich Kuhlencordte of material removal. Within the range of the chosen parameters, the created models‘ correlation coefficients, which were found to be close to 0.9, suggest that they might be used with confidence to predict the responses for the specified tool and work material combination.FIN 发表于 2025-3-26 02:24:53
https://doi.org/10.1007/978-3-662-61990-2 the MIGW joint was reported as stronger than the same of TIGW joint. The tensile strength of the MIG joint was nearly 82% higher than the same of TIGW joint. Also, the higher hardness of the MIG welded joint establishes the more suitability of MIG welding for Al6061 alloys.制定 发表于 2025-3-26 04:26:02
Verdauung und Verdauungsorgane,to develop the low cost customized weld strength predictor for the prediction of variations in tensile strength based on differing friction time, friction pressure, and upset pressure. The ultimate tensile strength of the AA6063-Copper joint is improved maximum of up to 222 MPa.确定 发表于 2025-3-26 08:49:58
https://doi.org/10.1007/978-3-662-36338-6 with δ-ferrite and contents of δ-ferrite in the weld zone increased by increasing the number of passes of weld hence, the hardness of weldment increased, as the number of passes of weld increases, and it was also observed that microstructure of fusion zone exhibited dendritic structure contained lathy and skeletal δ-ferrite.Adenocarcinoma 发表于 2025-3-26 14:52:07
Advances in Micro-milling: A Critical Review Materials, cutting forces, surface topography, burr formation, process monitoring, and cutting fluid are some of these components. This paper offers a comprehensive review of these criteria. A comprehensive critical analysis of these parts is paired with the literature review to conclude.恭维 发表于 2025-3-26 19:25:02
http://reply.papertrans.cn/17/1673/167284/167284_30.png