averse
发表于 2025-3-26 22:15:10
http://reply.papertrans.cn/17/1673/167250/167250_31.png
EXUDE
发表于 2025-3-27 03:03:56
http://reply.papertrans.cn/17/1673/167250/167250_32.png
DEI
发表于 2025-3-27 05:52:13
https://doi.org/10.1007/978-3-642-92446-0 manufacturing parts. The vibration resistance of the delicate tuning process during the finishing trimming of solid ends has been studied. The experiments were carried out on a special stand with the ability to change the parameters of the elastic system. Inductive and inductive sensors were used t
喃喃而言
发表于 2025-3-27 12:41:42
http://reply.papertrans.cn/17/1673/167250/167250_34.png
失误
发表于 2025-3-27 16:43:43
,Optische Eigenschaften der Festkörper,performance cutting modes and maximum tool accessibility. It is especially crucial for multiproduct and batch manufacturing. The article experimentally proves the scientific approach based on the machining Y-type forks using fixtures with incomplete locating and clamping on unmachined surfaces in on
Inculcate
发表于 2025-3-27 20:26:44
http://reply.papertrans.cn/17/1673/167250/167250_36.png
archetype
发表于 2025-3-27 23:51:08
https://doi.org/10.1007/978-3-662-36916-6ng tools during the milling process. In addition, the influence of the running-in process on the wear resistance of the cutting tool was taken into account. Considering the process of cylindrical milling with counter feed, dependencies were obtained based on the analysis of the horizontal component
不如乐死去
发表于 2025-3-28 05:56:37
Advances in Design, Simulation and Manufacturing VII978-3-031-61797-3Series ISSN 2195-4356 Series E-ISSN 2195-4364
出生
发表于 2025-3-28 09:45:42
https://doi.org/10.1007/978-3-031-61797-3Smart Manufacturing; Cyber-Physical Production System; Sustainable Engineering Design; Industrial Data
不安
发表于 2025-3-28 13:51:47
978-3-031-61796-6The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl