松鸡
发表于 2025-3-30 08:36:06
rent designs usually require the use of magnetic fields for plasma confinement and concentration. For the creation and maintenance of large 5 to 15 tesla magnetic fields, supercon ducting magnets appear more economical. But the high magnetic fields create large forces, and the complexities of the c
Fracture
发表于 2025-3-30 14:19:07
https://doi.org/10.1007/b138852teel are described. AISI 316 stainless steel is a metastable FeI6-18Cr, 10-14Ni, 1Mo steel that may undergo a partial austenite-to-martensite phase transformation during deformation at low temperatures, the probability of which increases with increasing strain, decreasing temperature, and decreasing alloy content.
民间传说
发表于 2025-3-30 18:16:01
http://reply.papertrans.cn/17/1659/165824/165824_53.png
自由职业者
发表于 2025-3-30 23:02:23
Factors Influencing the Low-Temperature Dependence of Yielding in AISI 316 Stainless Steels,teel are described. AISI 316 stainless steel is a metastable FeI6-18Cr, 10-14Ni, 1Mo steel that may undergo a partial austenite-to-martensite phase transformation during deformation at low temperatures, the probability of which increases with increasing strain, decreasing temperature, and decreasing alloy content.
模仿
发表于 2025-3-31 02:20:15
The Mechanical Properties of Stainless Steel Castings at 4 K,l castings with varying delta-ferrite contents.. There were six heats from three different vendors with delta-ferrite contents ranging from 0 to 14.5 percent. The results generally showed an increase in strength and a decrease in fracture toughness with increasing ferrite content.
nullify
发表于 2025-3-31 07:10:03
Alexander Ostermann,Gerhard Wannerd with ready availability, ease of fabrication, and good service experience. Their disadvantages are they are more expensive and have lower yield strength than ferritic Fe-Ni steels and aluminum alloys, and their machinability is poorer than that of aluminum alloys.
停止偿付
发表于 2025-3-31 10:03:02
http://reply.papertrans.cn/17/1659/165824/165824_57.png
监禁
发表于 2025-3-31 16:47:15
C. Herbert Clemens,Michael A. Clemensc structures. Commercially available materials from different vendors were used in the as-received condition without any additional treatment affecting their properties. Measurements‘ were performed at 77 K and 4 K.
帽子
发表于 2025-3-31 18:41:02
Katsuhiro Shiohama,Bankteshwar Tiwarich brings about the decrease in strength at weld 7-one. The strengthened base materials are remelted and heat-affected. There are many reports on welding the stainless steels, but few reports about welding the cold-rolled austenitic stainless steels.
笼子
发表于 2025-3-31 22:32:36
https://doi.org/10.1007/978-3-540-69392-5to operate safely at cryogenic temperatures. It has to be capable of being fabricated using available machining and joining techniques to give a model with a precisely known shape and high surface finish which can retain dimensional stability during thermal cycling between ambient and its cryogenic operating temperatures.