Goblet-Cells
发表于 2025-3-26 21:19:13
Development of Cryogenic Structural Materials for Tokamak Reactor, ordinary commercial products, mainly because of large electromagnetic forces. During the preliminary design of the Japanese Large Coil Task (LCT) coil at the Japan Atomic Energy Research Institute (JAERI), ordinary 304L stainless steel was selected as the structural material for the LCT coil case.
爱哭
发表于 2025-3-27 02:03:22
Martensitic Transformations in Fe-Cr-Ni Stainless Steels,stic modulus, high toughness and ductility, low thermal and electrical conductivity, and good weldability. Because of these characteristics, they are used more than any other alloy class for structures for service at 20 K and below, but their use is complicated by the metastability of the austenitic
conference
发表于 2025-3-27 08:57:11
The Influence of Martensitic Transformation on Strength and Plasticity of Fe-Cr-Ni Alloy Single Cryroperties of these materials at low temperatures. One of the most important properties of metastable stainless Fe-Cr-Ni alloys is the martensitic transformation, which occurs in them at low temperatures and during deformation. During this process, the initial fcc (y) austenite rearranges into parama
inflate
发表于 2025-3-27 13:02:47
Cryogenic Properties of Austenitic Stainless Steels for Superconducting Magnet,t” process is possibly applied to employ Nb.Sn superconductor instead of NbTi for the production of over five-tesla-class superconducting magnet. This process necessitates the structural materials with favored properties at cryogenic temperatures before and after Nb.Sn precipitation heat treatment.
locus-ceruleus
发表于 2025-3-27 14:20:19
Factors Influencing the Low-Temperature Dependence of Yielding in AISI 316 Stainless Steels, superconducting and nuclear energy devices. In this paper, factors influencing the initial yielding and stressstrain behavior of AISI 316 stainless steel are described. AISI 316 stainless steel is a metastable FeI6-18Cr, 10-14Ni, 1Mo steel that may undergo a partial austenite-to-martensite phase tr
Insubordinate
发表于 2025-3-27 19:36:07
http://reply.papertrans.cn/17/1659/165824/165824_36.png
爆米花
发表于 2025-3-27 22:01:10
http://reply.papertrans.cn/17/1659/165824/165824_37.png
Aspiration
发表于 2025-3-28 03:28:03
http://reply.papertrans.cn/17/1659/165824/165824_38.png
胆汁
发表于 2025-3-28 08:59:07
Effect of EB-Weld and Cold-Rolling on Low Temperature Strength and Toughness of Austenitic Stainles and nonmagnetic property. Recently, the higher strength austenitic stainless steels have been required for the development of superconducting technology. There are several ways to strengthen the austenitic steels, i.e. solution hardening, work hardening and precipitation hardening. Cold-rolling is
谷物
发表于 2025-3-28 12:48:08
http://reply.papertrans.cn/17/1659/165824/165824_40.png